Description
Toynol® DS-193L/193H Dispersing AgentProducts ShowProduct DescriptionCharacteristicsHigh performance dispersing agents in water-based system
Good wetting effect to pigment and fillings
Outstanding deflocculation
Provide powerful charge repulsion property
Suitable for various powder
Reduce viscosity of grinding system, improve color development of millbase
Specially suitable for organic/inorganic mixed pigment dispersion
APEO free
Chemical Components
Mixture of Amine alkyl hydroxy affixture of HMW styrene acrylic copolymers and surfactant
Highly Recommended Applications
Phthalocyanine organic pigments
Azo organic pigments
Other organic powder materials
Titanium DioxidePhysical properties | Typical Properties |
| Item | DS-193L | DS-193H |
| Appearance | Yellow transparent liquid | Yellow transparent liquid |
| Content(%) | 40% | 40% |
| Solvent | water | water |
Grinding operation
Dispersing sand mill, Glass bead(0.8-1.2mm), Filling rate 70%
3000rmp/min 60min
Performance evaluation- Centrifugal stability: take 20ml millbase into centrifuge tube, centrifuge 10 min under condition of 3000r/min, then take out to observe the layering of millbase. Pour out liquid and calculate amount and percentage of precipitate.
- Viscosity evaluation:Use Brookfield rotational viscometer.
- Fineness measure:Scraper fineness meter
- iscosity stability:Store millbase in 100ml wild-mouth bottle at 40ºC for 24 hours, measure viscosity change, ±50% change is regarded qualified.
Example1(★:Excellent ☆:Good )Experimental pigment: Titanium Dioxide, powder content 70%
Inorganic pigment content: 70
Dispersant dosage(as supplied): 17
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100 | Item | Toynol® DS-193L/H | Toynol® DS-194L | Imported dispersant |
| Dispersant dosage(SOP) | 10% | 10% | 10% |
| Wetting of original powder | Quick | Quick | Quick |
| Stock solution stability (centrifugation) | ★ | ★ | ☆ |
| Dilution stability(centrifugation) | ★ | ★ | ☆ |
| Millbase viscosity | ★ | ★ | ☆ |
| Dispersion fineness(μm) | ≤2.5 | ≤2.5 | ≤2.5 |
| Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy | Without thickening and thixotropy |
Example2(★:Excellent ☆:Good )
Experimental pigment: Fast Red P.R. 48:3 , powder content 35%
Organic pigment content: 35
Dispersant dosage(as supplied): 26
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100% | Item | Toynol® DS-193L/H | Toynol® DS-191L | Imported dispersant |
| Dispersant dosage(SOP) | 30% | 30% | 30% |
| Original powder wetting | Quick | Quick | Very quick |
| Stock solution stability (centrifugation) | ★ | ★ | ☆ |
| Dilution stability(centrifugation) | ★ | ★ | ☆ |
| Millbase viscosity | ★ | ★ | ☆ |
| Dispersion fineness(μm) | ≤2.5 | ≤2.5 | ≤2.5 |
| Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy | Without thickening and thixotropy |
(When actual operation:First add dispersant into water, then add powder, 4000rmp/min 10min. After powder completely wetting, put into grinding glass beads to start timing grind.)
Recommended Applications- Water-based inks
- Architectural coating
- Wood and furniture coatings
- Automotive coatings
- Can coatings
- Anticorrosive paint
- Leather coatings
Operation proposals - Suggested dosage of organic pigment(Based on pigment, Toynol® dispersants calculate solid content SOP):10-50%.
- Suggested dosage of inorganic pigment(titanium dioxide)(Based on pigment, Toynol® dispersants calculate solid content SOP):3-7%;
- Do not add wetting agents separately.
- Toynol® wetting agents can accelerate original powder wetting.
- Adding Toynol® defoamers can quickly eliminate grinding foam.
- To obtain optimal performance, Toynol® additives must be added in water before resin and pigment.
- Advise gradient test to get optimal dosage.
Packaging/storage
25L/plastic drum;220L/iron drum
As liquid material, this product should be sealed and placed in a dry, cool, well-ventilated place at room temperature Our Certifications ISO9001:2008 ISO14001:2004 OHSAS18001:2007 Our Company
FAQQ: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Contact us
Complaint
