SS304 Material and High Temperature Stainless Steel Float Switch

SS304 Material And High Temperature Stainless Steel Float Switch

A.[Feature of Magnetic float level switch]

• Good design and strict production technics;
• Adopt stainless steel material,high mechanical strength and good sealing;
• Cable adopt special material, it have high oil,acid,alkali,corrosive resistance.
• The ON or OFF switch control signal is very reliable and stable,without any error;
• Easy to installation,convenient to debug,fast fluctuation shift random to select the control range.

B.[Parameters]

C.[Installation]

• Use the black and blue wire.

        when the float is on the level surface,the contact is under the obstructed status,when the float is under the water,the contact is turn-on status;

• Use the black and yellow wire

         When the float is on the level surface,the contact si turn-on status,when is under the water,the contact is the obstructure status;

• Installation of fixed hammer

         The level control height is decided by the cable length of magnetic float type level switch and the position of the hammer;

• The ways of install the hammer
• Displace snap ring of the plastic non-cone terminal,and to the appropriate place on the cable.
• Then let the cable penetrate the terminal of the plastic cone,the snap ring of set on the cable limit the position of the hammer;
• Finally,fixed the cable outside of the container,let the cable connect to control box and avoid using middle joint.if it need joint forbid to put the joint in he water.