Fiber Optic Splice-on Hot Melt Type Sc/APC Fast Connector

Features:
Field-termination connector with no epoxy or polishing requiredNo matching gel enables low reflection and high reliabilitySplicing point is inside of the connector. No additional splicing work requiredEasily assembled with one-touch, push-pull systemUsed for φ3.0mm,φ2.0mm cable and 3x2mm drop cable etcThe fusion splice position can be protected by the heat shrinkable tube inside, not easy broken100% qualified, prolong use life, reduce the Maintenance costThe operator can confirm if the splicing is successful by the monitor of fusion splicing machine, to make it have more stability 

Technical Parameters:                                                                              

Item	Technical Parameters
Suitable Cable OD	0.9mm, 2.0mm, 3.0mm
Optical fiber diameter	125μm
Tight buffer diameter (μm)	900μm
Fiber mode	Single & multi mode
Operation time	About 120s ( no fiber cut )
Insert loss	≤ 0.3dB(1310nm & 1550nm)
Return loss	> 55dB
Fastening strength of naked fiber	>5 N
Fastening strength of naked fiber holder	>10 N
Tensile strength	>50 N
Using temperature	-40~+75°C
On-line tensile strength (20 N)	IL ≤ 0.2dB
Mechanical durability (500 times)	IL ≤ 0.2dB
Drop-off test (drop-off height 4m, once per direction, totally 3 times)	IL ≤ 0.2dB

Applications:                                                                                      

1. Fiber optic equipment, Fiber optic communication system

2. FTTH optic fiber terminal connection

3. Optical access network

4. Fiber optic data transmission, CATV

5. Central office connector replacement

6. Data center installation

Company Overview:

Our Exhibitions: