Ring material | E : Metal/ F :Powder metal |
Bearing at out put | Ball bearings |
Max. Radial load(10 mm from flange) | ≤50 N |
Max. shaft axial load | ≤30 N |
Radial play of shaft (near to flange) | ≤0.07 mm |
Axial play of shaft | ≤0.3 m m |
Backlash at no- load | ≤1.5° |
Model No | Rated Voltage | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Rotor Inertia | Weight | L1 Length L1 | Max Gear Ratio |
Single Shaft | V | A | Ω | mH | g.cm | g-m² | G | mm | ||
35STH28-0504A | 10 | 05 | 20 | 14 | 1000 | 4 | 11 | 140 | 28 | ≤1:264 |
35STH36-1004A | 2.7 | 10 | 2.7 | 4.3 | 1400 | 4 | 14 | 180 | 36 | ≤1:189 |
Reduction ratio | 3.71 | 5.18 | 14 | 19 | 27 | 51 | 71 | 100 | 139 |
Number of gear trains | 1 | 2 | 3 | ||||||
(L2) Length( L2) mm | 27.0 | 34.1 | 41.0 | ||||||
kg.c m Max rate d torque | 18 | 30 | 48 | ||||||
kg.c m Short time permissible torque | 54 | 90 | 144 | ||||||
Efficiency % | 90% | 81% | 73% | ||||||
Weight g | 195 | 210 | 290 |
Dimensions (mm) | Rated Voltage (VDC) | Current / Phase (A) | Reduction Ratio | Holding Torgue (g.cm) |
22 | 3.9-4.32 | 0.6-0.8 | 1:3.71-1:369 | 180-300 |
28 | 3.4-4.4 | 0.95 | 1:3.71-1:369 | 750-900 |
36 | 2.7-12 | 0.31-1.33 | 1:3.71-1:139 | 1000-2200 |
42 | 2.8-12 | 0.4-1.68 | 1:3.5-1:294 | 1600-3600 |
52 | 2.8-12 | 0.4-1.68 | 1:4.5-1:162 | 2600-4400 |
56 | 1.9-6.6 | 1.0-2.8 | 1::3.6-1:326 | 390-12600 |