Complaint
| model param | SRL-W500/2000 | SRL-W800/2500 | SRL-W1000/3500 | SRL-W1300/4500 | |
| hot mixer | total volume | 500 | 800 | 1000 | 1300 |
| effective volume | 375 | 600 | 750 | 900 | |
| feeding capacity per batch | ≤160KG | ≤250KG | ≤325KG | ≤500KG | |
| blade | 3 | 3 | 3 | 3 | |
| mixing time | 8-10min/batch | 8-12min/batch | 8-12min/batch | 8-12min/batch | |
| motor power | 55/75 | 83/110 | 110/160 | 132/200 | |
| cooling mixer | total volume | 2000 | 2500 | 3500 | 4500 |
| effective volume | 1500 | 1870 | 2500 | 3500 | |
| cooling time | 6-8min/batch | 6-10min/batch | 6-10min/batch | 6-10min/batch | |
| Electrical controlling part: | |||||
| Electric apparatus adopts Siemens; temperature controlling meter adopts RKC Japan; the mainshaft sealing wins the patent (Patent No: ZLP62430641) | |||||
NO | ITEM | TECHNICAL PARAMETER |
1 | Loading station | 1. Hopper volume: 300L 2. Made of SUS304 |
2 | Vortex air pump | 1. Maximum flow rate:380m3/h; 2. Vacuum degree:30KPa; 3. Drive motor power: 11kW 4. Suitable for negative pressure conveying |
3 | Pulse filter | 1. Clean compressed air can distribute to the cloth bag evenly; 2. Round shell with observation gate which is convenient for cleaning and changing the filter element; 3. Compressed air jar,air distribution system, electromagnetism pulse valve and its accessories; 4. Automatic clean system of pulse reverse blowing filter bag; 5. Electrical control panel can adjust pulse parameters and its program; 6. The material of the filter bag is polyester punched felt, the filter area is 6m2 7. Part which contact with material is made of: 1Cr18Ni9Ti δ=3mm |
4 | Vacuum feeding hopper | 1. Volume: 800L 2. Cylindrical body; conical bottom; 3. Carbon steel support; 4. The hopper is made of stainless steel |
5 | Pneumatic butterfly valve | 1. Model:QD71J-F250; 2. Valve body: stainless steel; 3. Control pressure:0.3~0.6MPa; 4. Operating temperature<100ºC; 5. Opening the valve plate is controlled both by electric and pneumatic; 6. Signal feedback of valve position; 7. Adopt imported pneumatic actuator |
NO | ITEM | TECHNICAL PARAMETER |
1 | Transfer silo | 1. Volume: 800L 2. The part connected with material:1Cr18Ni9Ti δ=2mm 3. Carbon steel support |
2 | Push screw | 1. Screw shaft with screw blade 2. Motor power: 1.1kw |
3 | Screw feeder | 1. Model: DT133 2. Screw diameter: 130mm 3. Screw shaft with screw blade; driving head is supported by outer ball bearing equipped with guard ring and seal ring 4. Gear motor drive; motor power: 2.2kw 5. Material: The part connected with material is 1Cr18Ni9Ti |
