Anti Explosion Rooftop Packaged Air Conditioning

Anti Explosion Rooftop Packaged Air Conditioning


Characteristics
Structure
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
Direct expansion coils with condensate drain tray.

Hermetic compressor
High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers
Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise

Centrifugal fan
Forward curve centrifugal fans for air treatment section and axial fans for condensation section
Front, side and underside air discharge of the treatment unit
High external pressure, long air supply distance

Electric panel
Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components

Easy operation line controller
Cooling/Heating/Auto
Error indication
Timing on/off

Explosion proof
Designed for Group II A, IIB, IIC.
Designed for Temperature classes T1-T6.
Designed for Explosive atmosphere Zone1, Zone2.
Designed for petroleum exploitation, refi nery, storage,
chemical, medicine, military facilities, etc.
Effi cient energy saving and low noise.
Single refrigeration type and refrigeration & heating type.
Explosion-proof mark: EXdemib II BT4, EXdemia II CT4.

Optional
Economizer with fresh, return air dampers and fresh air hood
Free cooling function for low ambient temperature
Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C
BMS devices
T3 (Tropical climate)
Roof curb
Metal / aluminum filter
Heat recovery to 100%
Evaporating section: double skin with 50mm polyurethane foam
Optional water heating coil
Metal or plastic mesh on condenser coil
Optional supply / return air configurations
Upgraded plug fan
G4 filter, plate and bag filter




Technical Data
   
* Performance values refer to the following conditions:
Cooling: room air temperature 27.0°C DB RH 50%, ambient air temperature 35°C;
Heating: room air temperature 20.0°C DB, ambient air temperature 7°C DB / 6°C WB.
** Noise level measured by adopting average value in the noise lab with background noise of 25 dB(A), at a distance of 1.5m high fan speed.

Our Company


Project


Ordering Process