DC12V 1cm Cutted Flexible LED Flex Neon Used for Neon Signage

Min.Order: 100

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 1.7 ~ 1.9

Description

DC12V 1cm Cutted Flexible LED Flex Neon Used for Shopping Malls

Neon strips Features:

1). Conventional 5 meters roll,50meters one roll, light angle 170 degrees.

2).Free to bend, can be arbitrarily fixed on the concave and convex surface, easy to install!

3).Every 1cm LEDs can be cut off along the above tangent line, without damaging other parts. Various lengths of light bar can be customized according to customer requirements.

4).we can provide the Carving knife

5).It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC 12V, 24V supply, high safety and reliability

details of quotation:

application places:

characteristic:

1)..This product is affixed with double-sided 3M strong adhesive tape on the back of the product. Simply remove the protective film when installing and stick it directly to the desired location.

2)..The maximum number of connections for this type of light bar single-channel drive is 1 volume. Exceeding this quantity, it is necessary to add a power drive circuit. Each volume is 5M.

3)..Calculate the power supply, design the power distribution scheme: the number of LED strips of the budget X the power of the single strips = the total power consumption. (It is recommended that the power supply has a margin, 80% of the rated power is used)

Installation matters:

1)..Note that the output DC voltage of the switching power supply should be consistent with the rated voltage of the light bar. Do not light the light bar directly with the AC 220V.

2)..Ensure that the light bar is firmly and reliably installed. It is best to use a special 3M adhesive to fix it.

3)..Please cut at the scissor mark, if it is installed outdoors, you must handle the waterproof measures in the middle connection.

4)..Do not bend the light bar excessively. The minimum angle must not be less than 10 degrees

5)..It must be installed in an anti-static environment. It is recommended that the operator wear an electrostatic ring.

Precautions:

1)..Working temperature is -50°C~70°C

2)..Avoid strong acids and alkalis around the work environment

3)..If the working environment is outdoor, please do a good job of waterproofing the butt joints

porducts pictures:

details picture:

Why choose us?

ABOUT US

Shenzhen Huayang Lighting Technology Co., Ltd. was built in 2010, which is located in Shenzhen, Guangdong province. We have been manufacturing in the field of led modules.Led neon more than 8 years, specializing in the production of advertising modules/neon such as outdoor light box signs. Focus on high quality, cost-effective products. The factory has more than 2000 square meters. Our production capacity is 1000000pcs module/month. We have injection machine, SMD machine, glue machine, etc.

Packing & Shipping

1. package: 5m/roll, 50m/roll

2. Shipping: 7-12days, by sea or by air

3. We can produce 1000000PCS per month

Service

1.we can reply the inquiry within 24hours;
2.we have professional staff answer all questions;
3.we can make the product that you need;
4.we can produce high-quality products on the basis of reasonable price;
5.we can make delivery in a very short time;
6.all products have 2-5years warranty;
7.Using good material and providing best service for our customers is our purpose.

FAQ

Q1: How can I place an order?

You can contact us by email or TM about your order details.

Q2: What is the order procedure?

Q3: How can I pay for you?

After you confirmed our PI, we will request you to pay. T/T(HSBC bank), PayPal, Western Union are the most usual ways we are using.

Q4: How to deal with the faulty?

Firstly, our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including recall recording to real situation.

Q5: How do you check all the goods in the production lines?

We have spot inspection and finished product inspection. we check the goods when they go into next step production procedure.

Q6: Can I have a sample order?

Yes, of course. we welcome sample order to test and check quality. Mixed samples are acceptable. Both OEM and ODM are acceptable.

Q7: How do you ship the goods and how long does it take to arrive?

We usually ship by DHL, Fedex or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q8: Are you a manufac turer or trading company? Do you have factory?

We are a professional manufacturer. we have factory with injection machine, SMD machine, glue machine, etc. Welcome to visit and the address is 4th Floor, 7th Building, Fengsheng Industrial Park, 310 Guiyue Rd., Potouxia Community, Guanlan, Longhua New Dist, Shenzhen.

Q9: Is it ok to print my logo on led light product?

Yes. please inform us formally before our production and confirm the design firstly based on our sample.

Q10: Are you wholesale or retail?

Both. we have the MOQ. The MOQ is 10 meters. Several samples are also available.

W E L C O M E TO ASK FOR SOME DETAILS

Forward

Related products