THE BIDDER INFORMATION |
1. Name of offeror company | NINGBO HYUAN POWER INDUSTRY CO.,LTD |
2. Name Factory | NINGBO HYUAN POWER INDUSTRY CO.,LTD |
3. Country of Origin Factory | CHINA |
4. Name of contact person | TAILICHEN |
5. Contact phone | 008613805895904 |
6. Contact Email | [email protected] |
Technical data | Unity | Specification | offered | Observations |
1) Technical data |
1.1 | Brand | | (*) | HEMG | |
1.2 | Model | | (*) | CJ | |
1.3 | rated torque: 1000 | NM | Required | 1000 | |
1.4 | Operating frequency: 60 | Hz | Required | 60 | |
1.5 | Operating Voltage: 125 ± 10% | vdc | Required | 125VDC+/-10% | |
1.6 | Type of operation | | | | |
1.6.1 Electric | | Required | ELECTRIC | |
1.6.2 Manual crank | | Required | MANUAL CRANK | |
1.7 | keypads | | | | |
1.7.1 Opening: Green Color | | Required | GREEN COLOR | |
1.7.2 Close: Color Red | | Required | RED COLOR | |
1.8 | Wiring contact closing and opening available in borneras | | Required | YES | |
1.9 | Position selector | | | | |
1.9.1 Local | | Required | LOCAL | |
1.9.2 Remote | | Required | REMOTE | |
1.9.3 Maintenance | | Required | MAINTENANCE | |
1.10 | Motor Voltage: 125 | Vdc / Vac | Required | 125VDC | |
1.10.1 Operating voltage range: | vdc | 80 to 150 | 80-150 | |
1.11 | Control coils 125 | vdc | Required | 125VDC | |
1.11.1 Operating voltage range: | vdc | 80 to 150 | 80-150 | |
1.12 | Limit (Limit Swich) Adjustable: | Degrees | 90 and 180 | 90/180 | |
1.13 | Direction of rotation for opening: Schedule | | Required | ANTICLOCKWISE | |
1.14 | Breaker protection shot Auxiliary Contact | | Required | YES | |
1.15 | Heating | | Required | | |
1.16.1 Heating Voltage: 120 | Vac | Required | 120VAC | |
1.16.2 Adjustable Temperature: | ° C | ≥30;≤55 | ≥30;≤55 | |
1.17 | contacts | | | | |
1.17.1 normally open contact 10 | c / u | Required | 10 | |
1.17.2 Contact normally closed 10 | c / u | Required | 10 | |
1.18 | Block wiring contacts available on terminal blocks | | Required | YEW | |
1.19 | Lamp for indoor lighting | | | | |
1.19.1 Lamp type: LED | | Required | YES | |
1.19.2 Lamp power | W | (*) | 10W | |
1.20 | The lower cap must be removable and smooth. | | Required | YES | |
1.21 | Set in block control terminals, power and signaling | | Required | YES | |
1.22 | Landing site | | Required | | |
1.22.1 Landing Holes: 2 | c / u | Required | 2 | |
1.23 | DC Contactor: 2 | c / u | Required | 2 | |
1.23.1 force contacts NA: 4 | c / u | Required | 4 | |
1.23.2 auxiliary contacts NC: 2 | c / u | Required | 2 | |
1.23.3 auxiliary contacts: 2 | c / u | Required | 2 | |
1.24 | Lock system | | | | |
1.24.1 Lockout | | Required | YES | |
1.24.2 Mechanical lock | | Required | YES | |
1.25 | Degree of protection: IP55 | | Required | IP55 | |
1.26 | Manufacturing material: aluminum or stainless steel | | Required | | |
1.27 | Fixing brackets 4 5/8 holes in galvanized steel bar | | Required | STAINLESS STEEL | |
1.28 | Disconnector opening time: | Sec. | ≤9 | <=9 | |
1.29 | Construction standards: IEC 62271-102, 62271-1 | | Required | IEC62271-102,IEC62271-1 | |
1.30 | Or latchkey lock: Handle with possibility to type padlocked | | Required | YES | |
1.31 | Control planes: | | Required | YES | |
2) testing and factory testing |
2.1 | IEC 62271-1, 60255-5 and 62271-102 a) Insulation Resistance Motor b) opening and closing speed c) Rotation d) electrical and mechanical lock e) Test torque | | Required | YES | |
|
|
|
|
|