IEC60695-2-10 Glow Wire Test Equipment

Min.Order: 1

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 3000 ~ 5000

Description

Glow wire test equipment

Application:
The glow wire tester heat the stipulated material, Ni80/Cr20, and heating wire, nichrome wire with diameter of 4 mm with high current up to test temperature 550 ºC ~ 960 ºC. After 1 minute, it burn the specimen verticality for 30s with specified pressure 1.0N. The ignitability of electric and electronic equipments is tested by judging whether the specimen and bedding materials are ignited or deciding the length of burning time; also, the ignitability, ignition temperature(GWIT) , flammability and flammability index of the solid insulating material and some other solid combustible materials are tested in this way.
The glow wire tester is usually applied to the research, production and quality testing departments for electric and electronic products as well as their parts and components, such as lighting equipment, low-voltage apparatus, electric instrument.

Test standard:
The tester comforms to IEC6069
5-2-10, UL 746A, GB/T5169.10, GB4706.1

Product picture:

Technical Parameters:

Model	BND-ZRS Glow Wire Test Equipment
Glow wire temperature	500 ~ 1000 ºC ± 2 ºCadjustable
Heating time	0-999.9s ± 0.1s,adjustable (normally choose to 30s)
Ignition timer	0-999.9s ± 0.1s, automatically records, manually suspended
Thermocouple	Φ0.5mm sheathed K-type thermocouple.
Flame extinguish time	0-999.9s ± 0.1s, automatically records, manually suspended
Glow wire	Φ4 mm nickel chromium wire.
Hot depth	7mm ± 0.5mm (to maintain the pressure of 1N ± 0.2N hot products into the test)
Sample frame speed	about 14mm / s
The pilot background	black background.
The pilot process	automatic testing procedures, independent ventilation
Reference	IEC60695-2-10, UL746A,GB/T5169.10-2006
Studio volume	0.5 cubic
Equipment size	1000mm wide × 650mm deep × 1300mm high
Power supply	AC220V ± 5%, 50Hz, 0.6KVA

Product features:
Work conditioning:
1) Work temperature is between 5ºC and 40ºC.
2) Relative humidity is not more than 85%.
3)Power supply should be AC220V±5%, 50HZ.
4)Use standard electrical outlet. Use 250 Voltage by ten ampere /Three Phase standard electronic outlet and earthing pole needs connect to earth wire.

Temperature of the tip of glow-wire	Electric current
550ºC	65A~75A
650ºC	80A~90A
750ºC	95A~105A
850ºC	110A~120A
960ºC	130A~140A

a. After putting the test specimen to the fixture, test specimen could be driven by electronic engine and could go left or right automatically control in the test process.

b. Mount glow wire. Test specimen carriage turns right to glow wire with hammer pulling the carriage in order to keep the force within 1 newton. The force shall be maintained at this value when the glow-wire or the test specimen is moved horizontally one toward the other. The penetration of the tip of the glow-wire into the through the test specimen shall be limited to 7mm.
c. Application time that glow wire tip is applied to the test specimen is controlled by numeric relay beforehand.

d. Ignition time is measured by numeric and controlled by button.

e. Flame extinguishing time is measured by numeric relay and controlled by button.

f. Glow wire temperature is controlled by adjusted glow wire current and measured precisely by Temperature controller.

FAQ
1.What about your quality?
Each equipment must be carry out 100% examination and test again before shipping

2.What is the MOQ ?
Most instruments support MOQ one set.

3.How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .
4.What is the warranty of the products?
One year ,but we can provide you life long support .

5.What is the package?
Export standard Solid wooden case

6.What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .

7.What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc

8.How to contact us ?

Address	Shenzhen Bonad Instrument Co.,Ltd. (Hong Kong Bonad Technology Limited) A301 Hongdu Building , 45 district, Baoan, Shenzhen City, Guangdong Province 518100,China
Contact Person	Rise

Working Hours	8:30~12:00 13:30~18:00 (from Monday to Friday)

Company  Profile :Our  Advantages :
Certifications :Factory  Introduction :Plant Warehouse :Cooperative Customers & Brands:
Customer Reviews :Product  Packaging :