Complaint
| Model | FM1304 | |
| Drive type | Drive type | |
| Engine | ||
| Engine model | LR6M5 | |
| Engine type | In-line plunger | |
| Engine power | 95.6KW | |
| Displacement(L) | 7.7 | |
| Capacity of fuel tank(L) | 150 | |
| Rated speed (r/min) | 2300 | |
| Cylinder·Bore·Stroke | 110×135 | |
| Compression ratio | 17.5:1 | |
| Fuel tank capacity(L) | 150 | |
| Fuel tank working pressure | 10kPa | |
| Injector tip type and model | Multi-hole, KBEL-P023 | |
| Intercooler type | After cool | |
| Air cleaner type and model | Oil bath, F5/6L912A11 | |
| Starter model | QDJ1408GM | |
| Cooling system type | Water cooling | |
| Transmission | ||
| Clutch | Dry, dual-stage type | |
| PTO Speed(rpm) | 540/1000 | |
| Gearshift | 4×(2+1)×2 combined/16F+8R(optional) | |
| Differential type(front/rear) | Close, 2 planetary gear / 4 planet bevel gear | |
| Central transmission type(front/rear) | Helical bevel gear/ Helical bevel gear | |
| Final transmission type ( front/rear) | Planetary/ Planetary | |
| Working device | ||
| Hydraulic suspension system form | Split type | |
| Suspension system type | Rear mounted three-point linkage | |
| Suspension category | Category 2 | |
| Adjusting way | Position adjust, force adjust | |
| Hydraulic pump type and model | Hydraulic pump,CBN-E320 | |
| Hydraulic output device | 2 sets hydraulic valve | |
| Opening pressure of system safety valve | 17~18MPa | |
| PTO type | Rear mounted, independent I type | |
| PTO spline no. | 8 | |
| Outer dia.of PTO spline | 38mm | |
| Max.lifting force | 21.7kN | |
| Driving system | ||
| Frame type | Frame type | |
| Tire model( front/rear) | 11.2-24/16.9-34 | |
| Tire pressure( front/rear) | 118~137/118~137kPa | |
| Rim material | 08AL | |
| Steering, brake system | ||
| Steering system form | Full hydraulic | |
| Steering cylinder type | Cycloid rotary valve type | |
| Brake system form | Wet, disk, hydrostatic operate | |
| Muffler | ||
| Dimension(L×W×Thickness or Dia. X L) | φ130×570mm | |
| Weight | 7.2kg | |
| Technical parameter | ||
| Dimension LxWxH (mm) | 4593×2240×2810 | |
| Wheel base(mm) | 2195 | |
| Track( front/rear) | 1610(ex-factory),1710,1810,1910/ 1720,1810(ex-factory),1920,2010 | |
| Adjusting way of track( front tire/rear tire) | Level-adjustable/ Level-adjustable | |
| Minimum ground clearance | 379mm(bottom of front axle) | |
| Min.Work weight | 3800kgs | |
| Weight of front/rear axle | 1550/2250kgs | |
| Max.ballast weight( front/rear) | 240/540kgs | |
| Gears( forward/reverse) | 16/8/0 | |
| Theoretical speed of gears (km/h) | Forward | 1.31,1.75,2.29,4.45,2.16,2.89,3.77,7.35,5.60,7.50,9.79,9.25,12.38, 16.17, 19.08,31.50 |
| Reverse | 2.0,2.7,3.5,6.8,8.6,11.5,15.0,29.3 | |
| Connecting way of engine and transmission box | Direct | |
| Power of PTO | Electric start | |
| Rear tyre | 82kw | |
| Max. traction force | 21.70kN | |
| ROPS | Two-column | |
| Headlight | 45-1254 | |
| Cabin | 800.46.010 | |
