Electrostatic Spray Powder Coating for Metal Storage Rack Pallet Racks

Electrostatic Spray Powder Coating for Metal Storage Rack Pallet Racks

Introduction:   Powder Coating Powder

The raw materials of Powder coating are resins, pigments, fillers, harderner ect. Compared with liquid paint, powder coating is environmental friendly and can reduce costs. Powder coating can form a harder finish than conventional paint and can be applied more efficient.  While it also has disadvantages, it is not good for large amd heat-sensitive objects. Usually the thickness of film by powder coating is >30 μm.

Technic Data:  Powder Coating Powder

• Specific gravity: 1.25-1.75 ( depend on colors)
• Particle size distribution(Laser Particle size analyser): Less than 5% above 100μm;50-65% above 32 μm
• Average particle size:35-45 μm
• Curing Schedule: 200°C 10minutes
• Optimal film thickness: 60-80μm
• 8-12 square meters/kg, thickness 60μm(100% of utilization rate)

The data above is rough and for reference only, please contact me for more accurate data

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
 

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg  net weight.

Dimension:28*33*39CM

 

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating