Hi-Target Model A16 GPS Rtk System with Ihand30 Controller

Min.Order: 1

Product origin: Nanjing, Jiangsu, China

Infringement complaint:

Complaint

US$ 3150 ~ 3350

Description

Hi-target A16 with the new high quality GNSS receiver of Hi-Target, benefiting from the next-generation GNSS engine, supporting the PPP service. It has full band support for cellular mobile networks (LTE, WCDMA, EDGE,GPRS,GSM), and supports most of the radio protocols on an internal UHF transceiver radio.

Has an innovative designs, a magnesium alloy structure and the Linux 3.2.0 operating system. The HD OLED color touch screen has a better display, and operates in rain. iRTK5 is an industry-leading GNSS RTK surveying solution.

Specification:

Configuration		Detailed indicators
GNSS Configuration	Satellite signals tracked simultaneously	Channels:336
		BeiDou: B1, B2, B3
		GPS: L1C/A, L2C, L2E, L5
		GLONASS: L1C/A, L2C/A, L3 CDMA
		GALILEO: E1, E5A, E5B, E5AltBOC, E6
		SBAS: L1C/A, L5
		QZSS, WAAS, MSAS, GAGAN, IRNSS
		Support the PPP service
	Output format	ASCII: NMEA-0183, binary data
	Positioning output frequency	Maximum 50Hz
	Static data format	GNS and Rinex
	Message type	CMR, RTCM2.X, RTCM3.0, RTCM3.2
	Network model	VRS, FKP, MAC; support NTRIP
System Configuration	Operating system	Cortex-A5 core, Linux
System Configuration	Data storage	Circulating 16GB internal storage; records GNS and RINEX formats simultaneously
Accuracy and Reliability^[1]	RTK Positioning	Horizontal: 8mm +1ppm RMS
	RTK Positioning	Vertical: 15m +1ppm RMS
	Static	Horizontal: 2.5mm +0.5ppm RMS
	Static	Vertical: 5m + 0.5ppm RMS
	Initialization time	<10s
	Initialization reliability	>99.99%
Connector	External connector	5-pin socket, USB socket, antenna port and SIM card slot
Communication	Cellular mobile	Internal 4G mobile network:TDD-LTE, FDD-LTE, WCDMA, EDGE, GPRS, GSM
	WiFi	802.11 b/g access point and client mode, WiFi hotspot available
	Bluetooth	Bluetooth® 4.0/2.1+EDR, 2.4GHz
	Internal UHF transceiver radio	Transmitting power: 0.1W-1W adjustable
		Frequency: 403MHz-473MHz
		Protocol: HI-TARGET, TRIMTALK450S, TRIMMARK, TRANSEOT
		Bands: 116 bands(16 bands are configurable)
		Working Range: Typically 3-5 km ,optimal 5-8 km
	External UHF radio	Transmitting power: 5W/25W adjustable
		Working voltage: 9-16V
		Frequency: 410MHz-470MHz
		Working Range: Typically 8-10 km ,optimal 15-20 km
Sensor	Electronic bubble	Intelligent levelling
	Tilt survey^[2]	Tilt correction system will continue to monitor the inclination of the centering rod, and compensate to correct the coordinates
	Temperature sensor	Intelligent temperature control
User Interface	Button	Single button
	Touch screen	Industrial OLED color screen (240 * 240); Capacitive touch, waterproof, supports glove operation
	LED Lamp	Satellite lamp, signal lamp, power light
Application Function	Advanced function	OTG, NFC, WebUI, USB firmware upgrade, battery quick charge
	Intelligence application	Intelligent voice, self-test function, network repeater station, radio repeater station
	Remote service	Message delivery, remote upgrade
Physical	Internal battery	6800mAh lithium-ion rechargeable and remove battery, RTK rover(UHF/Cellular)≥9 hours^[3]
	External power	6-28V DC external power input(5-pin port) with over-discharge protection
	Dimensions	Φ158mm×98mm
	Weight	≤1.2kg(includes battery)
	Power consumption	4.4W(static mode)
	Materials	The shell is made of magnesium alloy material
Environment	Water/dustproof	IP67
	Free fall	Designed to survive a 2m natural fall onto concrete
	Humidity	100%, condensing
	Operation temperature	-40ºC~+75ºC
	Storage temperature	-55ºC~+85ºC
Note: [1] Measurement accuracy and reliability are affected by many factors, including the satellite's geometric distribution, number of satellites, observation time, satellite ephemeris, ionospheric conditions and multipath. [2] Tilt measurement accuracy is disturbed by many factors, including external electromagnetic interference, pre-calibration precautions, and panel orientation. [3] Battery working time is related to work environment, working temperature and battery life.

With stronger ihand30 controller:
IHand30 hand-held controller is a professional data collector, based on the Android system. Using a combination of physical buttons and touch screen to operate, the default input languages are Chinese and English, and it supports multiple languages. The industrial-standard design can withstand 1.2 meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex operating environment. At the same time, the super capacity lithium battery can handle all weather requirements.

The iHand30 hand-held controller configs 3.7 inches 640 * 480 highlighted LCD; 1.5GHZ, quad-core 64-bit CPU; and 16GB ROM +2 GB RAM memory. It has a built-in Micro SD card slot, and maximum support 128GB expansion card (it only supports FAT32 format SD card, the NTFS format SD card can not be supported); dual card dual stand-by, and supports the entire 4G network. With the Android 6.0 operating system, the interface is optimized and easy to use.

Key Features:
1. Industrial-standard design, with IP67 it can withstand a 1.2 meters drop to a cement floor and adapt to a complex operating environment.
2. Highlighted LCD, the LCD screen is normally readable under strong sunlight.
3. Supports Bluetooth, Wi-Fi and 4G,which is convenient to carry out a variety of wireless data transmissions with the receiver. Wi-Fi and 4G can be used at the same time. Refer to the Hi-Survey Road Software User's Guide for more details.
4. Internal 8 million pixel camera: for field collection of image information.
5. Internal removable large capacity lithium battery for more than 15 hours of work.
6. Internal NFC chip, supports NFC data transmission for a rapid connection between the RTK and hand-held controller.
7. Fast charge technology: for a rapid battery charge.
8. Full keyboard input method.
9. Local online upgrade to facilitate quick changes.

Packing Details:
1 set packed in 3 cartons: 45*40*25cm (7kg),45*40*25cm (7kg), 17*14*145cm(5kg)

FAQ:

Service
1.Any inquiries will be replied within 12 hours.

2.All our products have one year warranty, And we sure the products will be free from maintenance within warranty period.

3.All products will have been strictly quality checked in factory before sending out.

We accept payment by TT,Paypal, West union.

If you'd like other payment method, Pls let us know before the order

Delivery / shippment :

1.Usually, we will send out the products within 3-5 working days after the payment confirmed

2.Before shipment, pls supply the following information to us :

Contact person or company name,Detail address,Telephone No,Zipcode

3.The buyer are responsible for the tax and/or duty charged by their country.

Return and warranty:

1.All products are inspected before shipment, if you are not satisfactory with the purchase,you can exchange the items in one week,and you must contact us within 24 hour of receipt of the products.

2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.

3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;

4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;

5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.

Contact Us:

https://surveyinginstrument.en.made-in-china.com/contact-info.html

Forward

Related products