Complaint
315 Ton Hydraulic press wheelbarrow making machine is mainly used for producing hand truck and wheel barrow ,actually Wheelbarrow Making Machine belongs to "Four-column quick deep drawing hydraulic press machine .
315 Ton Hydraulic press wheelbarrow making machine adopts advanced design technology of three-dimensional computer controlled (Finite Element Analysis & Prestressed Modal Analysis) and three beams-four columns body structure which makes it classic, contracted and utility.
2.Technical Parameters
For 315 Ton Hydraulic press wheelbarrow making machine:
| Parameter Iterm | Unit | YQ32-315A | YQ32-315B |
| Nominal Force | Kn | 3150 | 3150 |
| Max Pressure of Hydraulic systerm | Mpa | 25 | 25 |
| Effective stroke | mm | 1250 | 1250 |
| Max opening distance | mm | 800 | 800 |
| Workbench size(L-R) | mm | 1260 | 1000 |
| Workbench Size(F-B) | mm | 1160 | 1100 |
| Ejection cylinder nominal force | Kn | 630 | 630 |
| Stroke of Ejection Cylinder | mm | 300 | 300 |
| Velocity of Freeload | mm/s | 120 | 120 |
| Velocity of loading | mm/s | 8-15 | 8-15 |
| Velocity of retrn | mm/s | 90 | 90 |
4.Features:
1. Hydraulic machine body:
The four-column hydraulic press uses galvanized sheet as the substrate, the work table and the slider are made of 45# cast steel, and the galvanized sheet is used as the substrate. The high-quality environmentally-friendly polyester paint is used as the top coat.
2. Hydraulic machine master cylinder:
The cylinder of the machine is 45# steel, which is processed by forging to extend the service life of the machine.
3. Hydraulic system:
The high-flow cartridge valve is used, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit; the oil temperature and oil level display, air filtration and the like are included in the system; the oil tank is a steel plate The welded structure has a screw plug for draining and draining at the bottom; a plug-in hydraulic special motor reduces the noise in the workshop.
4. Electrical system:
The machine has a separate electrical control box that centrally controls the operation of the entire machine. The equipment is equipped with photoelectric protection and emergency stop buttons to ensure the safety of personnel and equipment during operation.
5. Operating system:
The PLC programming system is used to realize automatic switching between automatic and semi-automatic operation modes, which is convenient for equipment maintenance; the operating speed of the equipment and the pressure of the master cylinder can be adjusted arbitrarily; the process requirements of fixed and constant pressure during production can be met.,
| Main Press Machine | Usage | ||
| Four Column Hydraulic Press Machine | Cold Press Machine | bening, stamping,metal embossing,extrusion | |
| Heat Press Machine | powder forming | ||
| C Frame Press Machine | Bearing, Punching, Straightening | ||
| H / Gantry Frame Press Machine | Press-fit, Straightening | ||
| Customized Press Machine | Forklift solid tire press machine | ||
| Melamine press machine | |||
| Salt block press machine | |||
