Description
1GE xPON GPON ONU,(DT-xGPON-1G) is designed as SFU/HGU in different FTTH solutions, The carrier-class FTTH application provides data service access,It can switch automatically with EPON and GPON mode when access to the EPON OLT or GPON OLT,DT-xGPON-1G configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X,Power Plug:European standard Plug or American standard Plug is Optional.
Features
⊙Support IPv4 and IPv6 Dual mode.
⊙Support Port Forwarding and Loop-Detect.
⊙Support Firewall function and ACL function.
⊙Support LAN IP and DHCP Server configuration.
⊙Support TR069 remote configuration and maintenance.
⊙ Support EPON/GPON mode and switch mode automatically.
⊙Support SFU/HGU type and switch mode from ONU Webpage
⊙Support Route mode for PPPoE/IPoE/Static IP and Bridge mode.
⊙Specialized design for system breakdown prevention to maintain stable system.
Specification
Item | Parameter |
PON Interface | 1 GPON BOB ( Bosa on Board) Receiving sensitivity: ≤-27dBm Output optical power:0~+5dBm Transmission distance: 20km |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector(Regular) SC/APC(Customize) |
Chip Spec. | RTL9601D,DDR2 32MB |
Flash | SPI Nor Flash 16MB |
LAN Interface | 1x10/100/1000Mbps(GE) adaptive Ethernet interfaces. Full/Half, RJ45 connector |
LED | 4 LED, For Status of PWR , LOS , PON ,LINK/ACT |
Push-Button | 1, Function of Factory Reset |
Operating Condition | Temperature: 0°C~+50°C Humidity: 10%~90% (non-condensing) |
Storing Condition | Temperature: -30°C~+60°C Humidity: 10%~90% (non-condensing) |
Power Supply | DC 12V/0.5A |
Power Consumption | <3W |
Dimension | 120mmx78mmx30mm(LxWxH) |
Net Weight | 0.13KG |
Pilot Lamp | Status | Description |
PWR | ON | The device is powered up. |
OFF | The device is powered down. | |
LOS | BLINK | The device doses not receive optical signals or with low signals. |
OFF | The device has received optical signal. | |
PON | ON | The device has registered to the PON system. |
BLINK | The device is registering the PON system. | |
OFF | The device registration is incorrect. | |
LINK/ACT | ON | Port is connected properly (LINK). |
BLINK | Port is sending or/and receiving data (ACT). | |
OFF | Port connection exception or not connected. |