New Mobile Vertical Wall-Mounted Dental X-ray

Wall-mounted Dental X-ray 
CHD-DP10BN

Features
Using the international advanced technology, efficient integrated design, high efficiency, low radiation.
Using microcomputer intelligent control, not only remote controlled exposure but a more powerful function of low voltage alarm and high voltage protection.
Microfocus technology, much more clear image, and accurate diagnosis.
The base has two modes of mobile and fixed, pneumatic lift seat ensures more convenience for the dentist and more comfortable for the patient.
Can use lightroom dental film, imaging in one minute, maximum convenient dentist to diagnose.
Can connect to the dental digital imaging system, which is indispensable for clinicians to diagnose and root canal filling.
 

NEW Mobile Vertical Dental X-ray 
CHX-DP10DN

Precautions
1. In order to ensure safety in operation and use, the good ground lead must be installed well.
2. Because a small X-ray machine's thermal capacity is limited, attention should be paid to making the machine work intermittently.
3. Only during the exposure process this machine will produce X-rays. It won't produce X-rays in a power-off state, nor in the power-on state as long as not in an exposure.
4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified.
5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets.
6. Every time when disassembling the machine, disassemble the head first and then other parts.
8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position.
9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol.
10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well.
11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part lose, and the like.
13. The rated capacity of the machine is 1.1kw. Please select a power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduce machine life due to abnormal voltage.
 

Related Recommends