Complaint
YX667 is a model designed for handling heavy materials, featuring energy conservation & environment protection, reliable performance and high efficiency with comfort. This product has large breakout force and high work efficiency, which is adaptable to heavy working conditions. It's widely used in work sites as port, construction sites, quarry, mining and urban construction, etc.
ENSIGN Wheel Loader YX667:
High Reliability, Comfort & Efficiency
Reliability & Durability
Pilot control is used for working device hydraulic system, which increases the maneuverability.
Extended wheel base and rear mounted fuel tank increase the stability and bearing capacity.
Electronic control fixed shaft transmission and heavy duty axles are with high reliability and easy for maintenance.
Double sealing structure is adopted for hydraulic pipeline, which improves the sealing performance of hydraulic system.
Reinforced front and rear frames with high strength and long service life
Optimized working devices provide large breakout force and high load ratio.
Comfort & Efficiency
Hydraulic flow amplified steering system increases the steering pressure.
Full sealed space for engine and separated radiating air chamber greatly reduce the noise.
Comfortable cab and seat, with A/C as standard configuration
Technical Parameters
| Bucket capacity | m3 | 3.5(standard bucket) | Total cycle time(lift, dump& lower) | s | ≤10.6 |
| Rated load | kg | 6000 | Dump height/Dump angle | mm/ ° | 3010/45 |
| Overall operating weight | kg | 20120 | Dump distance/Dump angle | mm/ ° | 1250/45 |
| Max. traction force | kN | ≥186 | Min. ground clearance | mm | 445 |
| Max. breakout force | kN | ≥186 | Wheel base | mm | 3350 |
| Grade ability | ° | 30 | Wheel tread | mm | 2250 |
| Min. turning radius(outer side of the bucket) | mm | 7088 | Departure angle | ° | 30 |
| Min. turning radius(outer side of the tire) | mm | 6287 | Steering angle(left & right) | ° | 38 |
| Overall dimension (standard configuration) mm | 8725*3080*3500 | ||||
| Engine | Drive System | ||
| model | Weichai WD10G240E201 | Torque converter type | Single stage, 3 elements, centripetal |
| type | Vertical ,in-line, direct injection, water-cooling, four-stroke, Turbo charged | Transmission type | Fixed shaft electrical control shift |
| Rated power | 178kw | Gears | 4 forward,4 reverse |
| Main drive type | Spiral bevel gear, first reduction | ||
| Hub reduction type | Planetary | ||
| Drive axle | Dry type axle | ||
| Steering System | Braking System | ||
| type | Closed-core non-reactive hydraulic | Service brake | Air-over-oil caliper disc |
| oil pump type | Gear pump | Parking brake (emergency brake) | Manual pneumatic control drum brake |
| Working Device Hydraulic System | Tire | ||
| Control type | joystick | Specification | 23.5-25 |
| Oil pump type | Gear pump | Tread pattern | General pattern |
