Quantity(Piece) | 1 - 300 | >300 |
Est. Time(days) | 3 | To be negotiated |
We need to prepare the following machinery and materials before to make a beautiful stone frame. | |||
1. Heat press machine. | |||
2. Epson ink-jet printer( Need to be modified to continuous ink supply system). | |||
3. CISS ( The model must be match with the printer's model). | |||
3. Sublimation inks. | |||
4 Sublimation paper. | |||
5. High temperature tape ( This one you can choose or not). |
Item No. | SH38 | Size | 120*170mm |
QTY/CTN | 28PCS/CTN | G.W. | 16.5KG |
PACKING SIZE | 53*28*41cm | PACKING LIST | 1 pc/bubble bag 1 pairs of stents/box |
PRINTING TEMP. | 190ºC/340ºF | PRINTING TIME | 120/480 seconds |
1.Print the image out on sublimation paper with 2.The side have white coated is the printing side. 3.Use high temperatrue tape to fix the image
sublimation ink in your Epson inkjet printer. facing in the printing side of the sublimation stone.
4.Before heat transfer,we must to adjust the 5.Open the power,then to setup the 6.Put the stone onto the silicone work
pressure,mid pressure is ok. temperature and time. platform, the paper is on the top, facing
in the heating board.
Note(Step 6): Here you can choose the paper is on the top or is below. If the paper is below, need 480 seconds. If the paper is on the top, need 120-150 seconds.
7.When the temperature rised to 190 degrees, 8.Take out the stone when time is up. Peel off 9.Put it onto the stand,finished
then press down the handle. the paper.