Power Class | Single-phase 220v±15% Three-phase 380V±15% |
Input frequency | 47~63Hz |
Output frequency range | 0~500Hz |
Overload capability | G type:150% rated current for 60s; 180% rated current for 3s P type:120% rated current for 60s; 150% rated current for 3s |
Torque boost | Auto Torque boost Manual Torque boost; 0.1%~30.0%. |
V/F curve V/F | Four modes : Line , Multi-point , Square V/F curve, V/F separation |
Jog control | Jog frequency range:0.00Hz to F0-10(Max frequency) |
Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode, four kinds of Acc/Dec time Range of Acc/Dec Time0.0~65000.00s. |
DC brake | DC brake frequency: 0.00Hz to Maximum frequency brake time: 0.0 to 36.0s brake current value: 0.0 to 100% |
Simple PLC, Multi-speed | 16-speed operating through built-in PLC or control terminal |
Built-in PID | Close loop control system can be formed easily by using PID |
Automatic voltage regulating (AVR) | Output voltage is regulated when voltage of the power network changes |
Overvoltage and over current stall control | During operation automatically limits the inverter output current and bus voltage, to prevent fan over current and overvoltage trip. |
Rapid current limiting function | Minimizing flow failures, protect the normal operation of the inverter |
Instantaneous stop non-stop | Load feedback energy compensation voltage is reduced and continues to maintain a short time when change is momentarily interrupted. |
Speed tracking start | For high-speed rotation of the motor speed identification, impact- free smooth start |
Rapid current limit | Rapid software and hardware limiting technology to avoid frequent converter over current fault. |
Virtual IO | Five sets of virtual DO, five sets of virtual DI, enables easy logic control. |
Timing Control | Timing control: set the time range 0.0Min~6500.0Hour |
Multi-motor switch | Two independent motor parameters, enabling two motors switching control |
Bus Support | Two independent Modbus communication, CAN-Link |
Command source | Given the control panel, control terminal, serial communication port given. It can be switched by a variety of ways. |
Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~30.0%. |
Frequency source | Nine kinds of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting, or serial port and so on. It can be switched by a variety of ways. |
Auxiliary frequency source | Nine kinds of auxiliary frequency source. Flexible implementation of auxiliary frequency tuning, frequency synthesis. |
Input terminal | Six digital input terminals, one only supports 50khz high pulse input Two analog input terminals, one support 0V~10V voltage input One support 0 ~ 10V voltage input or 0 ~ 20mA current input |
Output terminal | One high-speed pulse output terminal (optional open collector type), support of square wave 0 ~ 50kHz signal output One digital output terminal One relay output terminals Two analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output |
Display and operation | |
LED display | Display parameters and status information |
The key lock and function selection | Achieve some or all of the keys locked, scope definition section keys to prevent misuse. |
Protection function | Input/output phase failure protection ,Overcurrent protection ;Over voltage protection; Undervoltage protection; Overheat protection ; Overload protection |
Options | Brake assembly, PG card |
Environment | |
Application environment | In-door, free from direct sunlight, dust , corrosive gas, combustible gas, oil mist , steam , water drop and salt . |
Altitude | Lower than 1000m |
Vibration | Less than 5.9m/s(0.6g) |
1. Can I get some samples?
Yes.Sample is available for quality check and market test.But you have to pay for it.
2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order.
3. What's your payment terms?
We usually accept all kinds of payment terms.Such as T/T, L/C, Western Union and Cash.
4. What's your warranty terms ?
We offer 18 months warranty time.
5. Do you have the products in stock?
Depending on your request, we have standard models in stock. Some special products and big order will be newly produced according to your order.
6. Can I mix different power in one container?
Yes. Different models can be mixed up in one container, even one order.
7. How does your factory control product quality?
Quality is priority ,we always attach importance to quality control from the beginning to the end of the production .Every product will be fully assembled and carefully tested before packing and shipping.
8. Can you sell spare parts?
If you are using CHIFON products.we can sell spare parts to you.But we couldn't sell the half-finished products.
9. I would like to know if you have a partner for exporting?
Yes, our company have the right to export and can sell electrical product all over the world.
10. Can you make the inverter and soft starter control boards ?
Yes, we have a lot of experience to design frequency inverters and soft starter cabinets according to your request.But you can send us the wiring diagram.
11. Can the inverter connect with computer?
Yes, all inverters have built-in RS485 port and support Modbus communication protocol.
12. How can I trust you?
Our company's values are integrity, responsibility, innovation and cooperation and our company has been audited and approved CE, ISO9001. Assessment report could be sent to you by e-mail. Also we are the made-in-china's gold supplier.