Complaint
| Main technical specification: |
| Model | CX16 | |
| Overall Dimensions | ||
| Wheel Tread | 1290 mm | |
| Length of track | 1670 mm | |
| Ground clearance of upper platform | 460 mm | |
| Turning radius of tail | 740 mm | |
| Width | 1050 mm | |
| Width of track | 230 mm | |
| Height of track | 410 mm | |
| Length | 3290 mm | |
| Total Height | 2400 mm | |
| Operating range | ||
| Max. Digging radius on ground | 3470 mm | |
| Max. digging radius | 3560 mm | |
| Max. digging depth | 2150 mm | |
| Max. digging height | 3275 mm | |
| Max.Dumping height | 2310 mm | |
| Max. vertical digging depth | 1740 mm | |
| Min. swing radius | 1440 mm | |
| Height of bulldozing plate | 285 mm | |
| Depth of bulldozing plate | 195 mm | |
| Specification | ||
| Operating weight | 1580 kgs | |
| Bucket capacity | 0.045 m³ | |
| Working device form | Yanmar backhoe | |
| Engine | Model | 3TNV70-SSY |
| Displacement | 0.854 L | |
| Rated power | 10 KW ,2200r/min | |
| Max. torque | 51.9N.M/ 1600r/min | |
| Speed Digging force | Max.travel speed | 1.5 km/h |
| Swing speed | 11rpm | |
| Max.gradeability | 30° | |
| Bucket digging force | 10.5 KN | |
| Bucket arm digging force | 6.5 KN | |
| Max. traction | 13.5 KN | |
| Ground specific pressure | 35kgf/cm2 | |
| Track Material | Rubber | |
| Type of track tension device | Butter oil cylinder | |
| Hydraulic and liquid capacity | Pump type | Gear pump (Italy type) |
| Working pressure | 16 Mpa | |
| Flow rate | 25.2L/min | |
| Hydraulic oil tank capacity | 15.3 L | |
| Engine fuel tank capacity | 2.8 L | |
| Fuel tank capacity | 16.4 L | |
| OPERATE: |
| Optional accessories: |
| PACKAGE |
| Hot Products |
| Excavator | Surface Finishing Screed | Concrete Vibrator | Power Trowel |
| Remote Control Trowel | Concrete Mixer | Plate Compactor | Compactor Machine |
| Drywall Sander | Steel Bar Cutter | Vibratory Roller | Steel Bar Bender |
| FAQ |
| 1. Do you guarantee safe and secure delivery of products? Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge. |
| 2. Can you supply the relevant documentation? Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. |
3. What is the average lead time? For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when we have received your deposit, and we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so. |
