250m Reach Vlan 8 Port High Power Gigabit Poe Switch

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 10 ~ 100

Description
250m Reach Vlan 8 Port High Power gigabit Poe Switch


DF-1.25G-8P-E/F is a 8-Port Gigabit PoE Switch with 8 PoE Ports, 1 SFP Gigabit Uplink Optical Ports, port 1 to port 8 supports PoE IEEE 802.3at international standard, each port power is 30W. Total power is 120W.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 1000Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
Typical applications please refer to following picture.

1.Features

  • 9/10-Port Gigabit PoE Switch with 8 PoE Ports, 2 SFP Gigabit Uplink Optical Ports
  • Supply power to wireless access points AP and network IP surveillance cameras 
  • Port 1 to Port 8 supports IEEE802.3at power (each port maximum power is 30W)
  • 8x 10/100/1000 Mbps ports +1/2x SFP gigabit optical uplink ports 
  • Compatible with IEEE 802.3 10i and IEEE 802.3u standard
  • The packet forwarding speed is 1.488Mbps of one wire-speed port
  • Port features with auto-flip(Auto MDI/MDIX)
  • Network port comes with lighting-proof 
  • All ports support wire-speed switching, frame size within the range of 64 to 1536 can achieve wire-speed 
  • Automatic adjustment, plug and play, no need software and protocol conversion
 

2.Highlights

  • No Frame Loss IP Data Transmission
  • PoE+ Standard 250m in One-key CCTV Mode
  • 10 KB Jumbo frames support
  • Few video time delay
  • 4KV Lightning Protection

3.Technical Specifications

ItemDescription
ModelDF-1.25G-8P-1/2F
Power SupplyPower Supply Mode Mains on load
Voltage RangeAC 100~240V
Power ConsumptionThe device <5W,                                                       POE power supply <120W
Network Port ParameterNetwork Ports 1~8 Ports: 10/100/1000Mbps Ethernet port, adaptive control
Uplink or SFP:1000Mbp
Transmission Distance1~8 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
1 fiber: 550m-120km
Transmission Media1~8 Ethernet Port:Cat5e/6 standard UTP cable,
1 SC  interface optical fiber
POE AgreementIEEE802.3 af/at standards
PoE Power Supply ModeEnd-span method
PoE Power Supply WattageEach port≤30W,Whole device<120W
Network Switch SpecificationNetwork StandardIEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
Swap ModeStore-and- forward
Switch Capacity20Gbps
MAC Address List8K
Status IndicatorsPower Indicator LightOne power light (green)
Optical Fiber Port Indicator One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data
PoE Indicator 1~8 PoE indicator light(yellow)
PoE Network Port LED1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
Switch Switch 1(Vlan)ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port; OFF: Vlan close, normal status
 Switch 2(CCTV Mode)ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port, power and data can reach 250 meters;
OFF: Vlan close, normal status
Protection LevelSurge ImmunityLevel 3, executive standard:IEC61000-4-5
Electrostatic Protection1a touch electric discharge: level 3                       1a Air discharge: level 3                               Executive standard:IEC61000-4-2
Operating EnvironmentWorking Temperature-10ºC~55ºC
Storage Temperature-40ºC-85ºC
Humidity(non-congeal)0~95%
Mechanical AttributesDimensions (L*W*H)188.5mmx102.5mmx28.25mm
ColorBlack
Weight1kg
ReliabilityMean time between failures (MTBF)>50000h
 
Note:
If any changes with product specification, forgive without prior notice.
1) As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.

4.V-lan

4.1 Introduction
  When V-lan function is opened, the LAN port can't make data conversion but can only communicate via uplink port. The V-LAN workstation is built separately between every network port and UP-LINK port.
In the same V-lan workstation, no matter which actual PoE switch being connected, the signal transmission are separately isolated from each other which seems they are on the different switches. The broadcast in the same V-lan can only be received by the members but can't be transmitted into other V-lan, which can greatly control unnecessary broadcast storm. What's more, different V-lan can't even communicate with each other when there is no routing, which increases the safe degree among different department in the enterprise.
4.2 Configuration
  Toggle the V-lan button on the back of the switch to ON state, V-lan indicator lights, then press the reset button to restart the switch, in this way V-lan functions.
Note:
  Please press reset button or repower the device when turn on V-lan, only in this way the switch can enter corresponding mode.

5.Package accessories

Packing List
1) 1 set of 8 port poe switch
2) 1 AC cable
3) 1 user manual



Would you like a 8 port poe switch to test?Please leave me an inquiry or contact me directly.
Product Tag:
Related categories:
Scroll to Top