Complaint
| Item | CL-HFT | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Radial Shrinking Ratio | 2:1 3:1 | |
| Longitudinal Shrinking Ratio | ±5% | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Aging in circulating-air oven | (158±1.0)ºC,7days | |
| After aging | Tensile Strength | ≥7.3MPa |
| Elongation Ratio | ≥100% | |
| Dielectric Voltage Withstand | 600V | |
| Corrosion of Bare Copper | ≥15kV/mm | |
| Flammability | VW-1 | |
| Concentricity | ≥65% | |
| Size | As Supplied | After Recovery | Packing Length | ||
| ID (Inside Diameter) | T(Wall-thickness) | ID (Inside Diameter) | T(Wall-thickness) | (Meter/Roll) | |
| Φ1.5 | 2.00±0.30 | 0.20±0.08 | ≤0.80 | 0.40±0.08 | 200 |
| Φ2.0 | 2.50±0.30 | 0.20±0.08 | ≤1.00 | 0.42±0.08 | 200 |
| Φ2.5 | 3.00±0.30 | 0.22±0.08 | ≤1.25 | 0.42±0.08 | 200 |
| Φ3.0 | 3.50±0.30 | 0.25±0.10 | ≤1.50 | 0.46±0.10 | 200 |
| Φ3.5 | 4.00±0.30 | 0.25±0.10 | ≤1.75 | 0.46±0.10 | 200 |
| Φ4.0 | 4.50±0.30 | 0.25±0.10 | ≤2.00 | 0.48±0.10 | 200 |
| Φ4.5 | 5.00±0.30 | 0.25±0.10 | ≤2.25 | 0.50±0.10 | 100 |
| Φ5.0 | 5.50±0.40 | 0.25±0.10 | ≤2.50 | 0.50±0.10 | 100 |
| Φ6.0 | 6.50±0.40 | 0.28±0.12 | ≤3.00 | 0.56±0.10 | 100 |
| Φ6.5 | 7.00±0.40 | 0.28±0.12 | ≤3.25 | 0.56±0.10 | 100 |
| Φ7.0 | 7.50±0.40 | 0.30±0.12 | ≤3.50 | 0.58±0.10 | 100 |
| Φ8.0 | 8.50±0.50 | 0.30±0.12 | ≤4.00 | 0.60±0.10 | 100 |
| Φ9.0 | 9.50±0.50 | 0.30±0.12 | ≤4.50 | 0.60±0.10 | 100 |
| Φ10 | 10.50±0.50 | 0.36±0.12 | ≤5.00 | 0.72±0.12 | 100 |
| Φ11 | 11.50±0.50 | 0.36±0.12 | ≤5.50 | 0.72±0.12 | 100 |
| Φ12 | 12.50±0.50 | 0.36±0.12 | ≤6.00 | 0.72±0.12 | 100 |
| Φ13 | 13.50±0.50 | 0.36±0.12 | ≤6.50 | 0.72±0.12 | 100 |
| Φ14 | 14.50±0.50 | 0.36±0.12 | ≤7.00 | 0.72±0.12 | 100 |
| Φ15 | 15.50±0.50 | 0.36±0.12 | ≤7.50 | 0.72±0.12 | 100 |
| Φ16 | 16.50±0.50 | 0.36±0.12 | ≤8.00 | 0.72±0.12 | 100 |
| Φ17 | 17.50±0.50 | 0.36±0.12 | ≤8.50 | 0.72±0.12 | 100 |
| Φ18 | 18.70±0.60 | 0.40±0.15 | ≤9.00 | 0.78±0.15 | 100 |
| Φ20 | 20.70±0.60 | 0.40±0.15 | ≤10.0 | 0.80±0.15 | 100 |
| Φ22 | 22.70±0.70 | 0.46±0.20 | ≤11.0 | 0.86±0.15 | 100 |
| Φ25 | 25.70±0.70 | 0.46±0.20 | ≤12.5 | 0.90±0.15 | 50 |
| Φ28 | 29.00±0.70 | 0.46±0.20 | ≤14.0 | 0.95±0.20 | 50 |
| Φ30 | 31.00±1.00 | 0.46±0.20 | ≤15.0 | 1.00±0.20 | 50 |
| Φ35 | 36.00±1.00 | 0.50±0.22 | ≤17.5 | 1.00±0.20 | 50 |
| Φ40 | 41.50±1.50 | 0.50±0.25 | ≤20.0 | 1.15±0.25 | 50 |
| Φ45 | 46.50±1.50 | 0.50±0.25 | ≤22.5 | 1.15±0.25 | 50 |
| Φ50 | 52.00±2.00 | 0.60±0.25 | ≤26.0 | 1.20±0.25 | 50 |
| Φ55 | ≥55.00 | 0.60±0.25 | ≤28.0 | 1.20±0.25 | 50 |
| Φ60 | ≥60.00 | 0.60±0.25 | ≤30.0 | 1.20±0.25 | 50 |
| Φ70 | ≥70.00 | 0.70±0.30 | ≤35.0 | 1.20±0.25 | 50 |
| Φ80 | ≥80.00 | 0.70±0.30 | ≤40.0 | 1.25±0.25 | 25 |
| Φ95 | ≥90.00 | 0.70±0.30 | ≤45.0 | 1.45±0.25 | 25 |
| Φ100 | ≥100.00 | 0.70±0.30 | ≤50.0 | 1.45±0.25 | 25 |
Special specifications, wall thickness can be customized.
