★Description
EONU 1GE+WiFi (DT-EONU+1GE+WF) It's with EPON OLT are used together to provide a complete broadband access solution.EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements. DT-EONU+1GE+WF series fully meet IEE802.3ah and CTC3.0 standard protocol. It has good third-party compatibility to work with the third party OLT, It supports 1Gbps transmission rate up and down and provides users with good QOS, flexible bandwidth allocation of Ethernet services and IP integrated service. DT-EONU+1GE+WF series can integration wireless function with meet 802.11 n/b/g technical standards, It has two external antenna, the wireless transmission rate up to 300Mbps. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.The device shell adopts personalized ventilation design, simple, fashion, steady. High quality environmental protection material is impact resistant, high temperature resistant and good heat dissipation effect to providing users with a more secure Internet environment.
★Feature
⊙Support port flow control
⊙Up to 20KM transmission Distance
⊙Support software online upgrading
⊙In compliant with IEEE802.3ah Standard
⊙Support port mode of VLAN configuration
⊙Support Dynamic Bandwidth Allocation (DBA)
⊙Support port isolation between different ports
⊙Support broadcasting storm resistance function
⊙Wi-Fi series meet 802.11 n/b/g technical standards
⊙Support port-based rate limitation and bandwidth control;
⊙Support ACL and SNMP to configure data packet filter flexibly
⊙Support power-off alarm function ,easy for link problem detection
⊙EMS network management based on SNMP ,convenient for maintenance
⊙Support data encryption, group broadcasting, port Vlan separation ,etc.
⊙Support ONU auto-discovery/Link detection/remote upgrade of software;
⊙Specialized design for system breakdown prevention to maintain stable system
★Specification
Item | Parameter |
PON Interface | 1 EPON optical interface |
User Ethernet | 1*10/100/1000M auto-negotiation Full/half duplex mode |
Power Interface | An external 12V DC 0.5A power supply adapter |
PON Optical Parameter | Wavelength: Tx:1310nm, Rx:1490nm |
Data Transmission | PON Throughput: Downstream 980Mbps; Upstream 950Mbps |
Business | Layer 2 wire speed switching Support VLAN TAG/UNTAG,VLAN translation Support Port-based speed limitation Support Priority classification Support storm control of broadcast Support loop detection |
Network | Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management |
Management | Status monitor, Configuration management, Alarm management, |
Shell | Plastic casing |
Power | <4W, 12V/0.5A power supply adapter |
Physical | Item Dimension:130mm(L) x90mm(W) x 30mm (H) Item weight:0.2kg |
Environmental | Operating temperature: 0 to 50ºC |
Indicator | Description | ||
1 | WIFI | WIFI | Blinking:Data is being transmitted On:Wi-Fi function Open Off:Wi-Fi function Close |
2 | LAN | LAN Port status | On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up; |
3 | LOS | GPON optical signals | On: Optical power lower than receiver sensitivity ; Off: Optical in normal |
4 | PON | ONT Register | On: Success to register to OLT Blinking: In process of registering to OLT; Off: In process of registering to OLT; |
5 | PWR | Power status | On: The ONU is power on; Off: The ONU is Power off; |