Complaint
Energy-saving Full-fiber Bogie-hearth Resistance Furnace Product Description:
The cover and trolley of the series of the electric furnaces are welded by steel plate and section steel. Soft contact between the trolley and furnace lining can sharply reduce thermal radiation and convective thermal losses so as to guarantee the furnace leakproof-ness.
The furnace body is built with a high temperature -resistant light bricks and insulating bricks. The equipment is mainly applied to the heating of large carbon steel and alloy steel parts, such as the heating, annealing, normalizing, quenching & tempering; surface quenching and tempering; stress-relieving annealing by welding, etc.
The furnace door is controlled to go up and down by up and down of the rolling wheel on the guide rails and is sealed with the domestic advanced spring compression mechanism so as to ensure that when closing, the fiber of furnace door can be matched with the furnace body and sealed tightly, and the fiber will not be fractioned in the closing and opening process of the furnace door. The power of the furnace door and the trolley is provided by the electric motor and planet-cycloid retarder, which has a controlled brake function.
Each active mechanism in the electric furnace is installed with interlocking control, that is, after the furnace door is opened, the power used to heating components will be cut off automatically, and meanwhile, the power used for moving the trolley is recovered; after the furnace door is closed, the power used for moving the trolley will automatically cut off and meanwhile, the power used for heating components is recovered. In this way, accidents caused by misoperation can be avoided.
The heating component is winded up by high resistance alloy wires into a belt or helical form, installed on the furnace's two sides and the bricks where the trolley is placed, and then fixed with high-alumina ceramic nails and socket brick just in case of sliding out.
On the trolley installs pressure tolerant and high-temperature resistant cast steel furnace bottom plate to load the workpieces. In order to prevent the oxide scale generated by heating the workpiece, from falling into the surrounds of heating components through the clearance in the furnace bottom plate, which might pose damage to the heating components, the contact between the furnace bottom plate and furnace body is of plug-in contact.
Main technical Parameter:
| Model | Name | The main parameters | ||||
| Power KW | Voltage | Rated temperature (C°) | Dimension (mm) | |||
| Phase | Voltage (V) | |||||
| RT2-130-12F | Tilting trolley type resistance furnace | 130 | 3 | 380 | 1200 | 2000x950x750 |
| RT2-180-12F | Tilting trolley type resistance furnace | 180 | 3 | 380 | 1200 | 2400x1100x800 |
| RT2-2200-12F | Tilting trolley type resistance furnace | 220 | 3 | 380 | 1200 | 2600x1200x800 |
| RT2-130-11 | Trolley type resistance furnace | 130 | 3 | 380 | 1200 | 2000x950x750 |
| RT2-180-11 | Trolley type resistance furnace | 180 | 3 | 380 | 1200 | 2400x1100x800 |
| RT3-130-12F | Energy-saving full-fiber tilting trolley furnace | 130 | 3 | 380 | 1200 | 2000x950x750 |
| RT3-180-12F | Energy-saving full-fiber tilting trolley furnace | 180 | 3 | 380 | 1200 | 2400x1100x800 |
| RT3-220-12F | Energy-saving full-fiber tilting trolley furnace | 220 | 3 | 380 | 1200 | 2600x1200x800 |
| RT2-105-9(12) | Bogie hearth resistance furnace | 105 | 3 | 380 | 1100 | 1800x900x600 |
| RT2-130-9(12) | Bogie hearth resistance furnace | 130 | 3 | 380 | 1100 | 2000x950x750 |
| RT2-180-9(12) | Bogie hearth resistance furnace | 180 | 3 | 380 | 1100 | 2400x1100x800 |
| RT2-320-9(12) | Bogie hearth resistance furnace | 320 | 3 | 380 | 1100 | 3000x1530x950 |
| RT3-130-12 | Energy saving all fiber table resistance furnace | 130 | 3 | 380 | 1200 | 2000x950x750 |
| RT3-180-12 | Energy saving all fiber table resistance furnace | 180 | 3 | 380 | 1200 | 2400x1100x800 |
| RT3-220-12 | Energy saving all fiber table resistance furnace | 220 | 3 | 380 | 1200 | 2600x1200x800 |
Installation:
About Company:
Anhui Xinning Equipment Co., Ltd.(Former Anhui Province Ningguo Xinning Equipment Manufacturing Science & Technology Development Co., Ltd), which is located in state-level economic and technological development zone of Ningguo city, covers an area of 40 acres, Production workshop is 50000 square meters, is a technology enterprises that professional in research and development, manufacture complete sets of wear resistant castings and its associated equipment.
Currently enterprise is the"Anhui province private technology enterprises, Anhui province high-tech enterprises", Xinning company rely on the abundant technical force, excellent production equipment, scientific management system, independent developed series"sand lined iron mold casting line, flaskless molding casting line, oil quenching heat treatment line, casting sand recycling machine, steel ball mold and a full set of ball casting production equipment etc..."and sand lined iron mold casting line became scientific and technological project of Anhui Province in 2013.
Through the cooperation between school and enterprise, Xinning company set up"Master's training base for Anhui Polytechnic University, Wear-resisting equipment technology research and development center for Jinan University, Production, study and research base for Anhui research institute of mechanical science" etc... Our company has a number of independent intellectual property rights, of wich more than 30 patents for inventions. And casting ball heat treatment line listed in the "national torch plan" in 2013.
Relying on the base of Ningguo wear-resistant industry, Combined with the practical experience of more than ten years of Wear-resisting material and equipment manufacturing, has a engineer team with group of design, manufacturing, ball automatic casting line, with advanced manufacturing equipment, has a strong ability in research and development, manufacturing, scientific quality control processes,perfect after-sale service system, let clients use without hesitation. Meanwhile, Xinning company can provide the overcall planning and design for the project of new wear-resistant materials enterprise, supporting the process technology of the whole product and the training for equipment operator & maintainer.
Exhibition Gallery:
FAQs:
1. Are you a manufacturer?
Yes, we are a manufacturer as well as a supplier of various types of steam turbines.
2.What about the product quality?
We have testing and quality control department to ensure the quality of the products to meet national and international standards in the steam turbine industry.
3.What about the price?
We only offer a reasonable price instead of high price. Different quality and at a different price.
4. What about after sales services?
We provide after sales services based on customer demand. we provide installation and maintenance assistance abroad as we have customers around the globe. for more detail see above "Our Services".
5. What about Custom manufacturing?
Yes, we do custom manufacturing as well based on customer requirement.
Contact Information:
