1.Pneumatic welding, each welding electrode is controlled by one SMC air cylinder.
Electrodes 20*20*20mm, can be used 6 sides.
2.Double cross wire feeders, can feed different length of cross wires. It is specially designed, the feeding
speed is higher, can be 130pcs/min.
3.The edge cutter is controlled by two big SMC brand air cylinders and specially designed, the cutting speed
can match the welding speed.
4.Panasonic servo motor for pulling mesh, cross wire space can be adjusted by PLC.
Model | DP-AW-1200H | DP-AW-1500H | DP-AW-1600H |
Wire diameter | 2-3.5mm/2-4mm | ||
Longitude wire space | Mostly 50-200mm(If min.25*25mm, we can also design.) | ||
Crosswire space | Min.25mm or smaller (PLC control) | ||
Mesh width | Max.1200mm | Max.1500mm | Max.1600mm |
Welding electrodes | 25pcs | 31pcs | 32pcs |
Welding transformer | 125kva*3pcs | 125kva*4pcs | 125kva*4pcs |
Longitude wire feeding | Form wire coils | ||
Crosswire feeding | Pre-straightened&pre-cut(cross wire feeder) | ||
Welding speed | Max.130 times/min | ||
Space needed | 12*5m | ||
Machine weight | 3100kg | 3600kg | 3840kg |