Square/Round Alumina/Silicon Carbide/Zirconia/Magnesia Ceramic Foam Filter Plate

Ceramic foam filter is a kind of porous material with high temperature characteristics. Its pore size ranges from nanometer to micron, its porosity is between 20% and 95%, and its operating temperature is room temperature 1600°C. Due to its high porosity, high specific surface area, thermal shock resistance, high temperature resistance, chemical resistance, good mechanical strength, good filtration and adsorption properties, Ceramic Foam Filter can be widely used in heat exchange materials, cloth gas materials, automobile exhaust equipment, purification metallurgy, industrial filtration of molten metal, thermal energy recovery, light industrial spraying industry, industrial wastewater treatment, thermal insulation material, chemical Honeycomb Substrate. Ceramic Foam Filter have been used in automotive catalytic converters for a long time. The deodorant ceramic foam filter catalyst enables the catalytic combustion of organic solvents and malodorous gases in the waste water to achieve the purpose of deodorization and purification. The use of high-permeability Ceramic Foam Filter that are resistant to high temperatures and have sufficient thermal shock resistance can effectively remove high-temperature dust gases. In the process of urban sewage treatment, Ceramic Foam Filter also become one material for aeration treatment in urban sewage treatment.

Technical Indicators:

Material	Alumina
Using Temperature	≤1000ºC
Colour	White
Pore size	4~60
Porosity(%)	80~90
RT Mpa	≥1.4
Bulk Density	0.35~0.50
Thermal Shock Resistance(time/1100°C)	6

Alumina Foam Filter:
Ceramic foam filter is a kind of effective molten metal filter. It's three-dimensional connected mesh structure and high porosity has many advantages, for example, large surface area of slags collection, large inner surface area of filtering, small flow resistance, good filtering effect, etc.
Physical and Chemical Properties:

Material	Alumina
Color	White
Pore Density	8-60ppi
Porosity	80-90%
Refractoriness	≤1100ºC
Bending Strength	>0.6Mpa
Compression Strength	>0.8Mpa
Volume-weight	0.3-0.45g/cm3
Thermal Shock Resistance	6times/1100ºC
Application	Aluminium, Aluminium alloys and other Non-ferrous alloys

Specification for Al2O3 Foam Filter:

Dimension (mm)	Dimension (inch)	Pouring Rate (kg/s)	Filtration Capacity (ton)
178*178*50	7*7*2	0.2-0.6	5
228*228*50	9*9*2	0.3-1.0	10
305*305*50	12*12*2	0.8-2.5	15
381*381*50	15*15*2	2.2-4.5	25
430*430*50	17*17*2	3.0-5.5	35
508*508*50	20*20*2	4.0-6.5	45
585*585*50	23*23*2	5.0-8.6	60

SiC Carbide Foam Filter:
Functions of ceramic foam filter
Decontaminate the melting metal liquid
Simplified gating system
Improve the metallurgical structure of the castings
Reduce imparities of the castings
Improve casting quality rate
Reduce casting internal re-oxidation defects
Reduce the surface defects after machining of the castings

Physical and Chemical Properties:

Material	Silicon Carbide
Color	Grey Black
Pore Density	8-60ppi
Porosity	80-90%
Refractoriness	≤1500ºC
Bending Strength	>0.8Mpa
Compression Strength	>0.9Mpa
Volume-weight	0.35-0.5 g/cm3
Thermal Shock Resistance	6times/1100ºC
Application	Ductile Cast Iron, Malleable Cast Iron, Gray ironand other Cast Iron

Specification for SiC Carbide Foam Filter:

Dimension (mm)	Pouring Rate (kg/s)		Filtration Capacity (ton)
	Grey Iron	Ductile Iron	Grey Iron	Ductile Iron
40*40*22	4	3	65	32
50*50*22	6	4	100	52
75*50*22	9	6	150	75
75*75*22	14	9	220	100
100*50*22	12	8	200	100
100*75*22	18	12	300	150
100*100*22	25	16	400	200
150*150*22	50	36	900	450

Zirconia Foam Filter:
Foam ceramic filter have the characters of light, high strength, large specific surface area, high porosity, excellent heat resistance and chemical corrosion resistance. With the distributing pores net structure, they are able to increase the surface area, and absorb the thin waste, so the liquid metal can be molding safety. With the excellent characters, the Ceramic Foam Filter improve molding quality by reducing the reject probability of moldings and divide from that quality problem such as waste pore, sand pore and air pore. So that Ceramic Foam Filter are widely applied in the plant of nonferrous metal casting such as the casting of steel, iron, copper and aluminum. The material of the Zirconia Ceramic Foam Filter is ZrO2. It is mainly used for purification process of steel and stainless steel production.

Physical and Chemical Properties:

Material	Zirconia
Color	Yellow
Pore Density	8-60ppi
Porosity	80-90%
Refractoriness	≤1700ºC
Bending Strength	>1.0Mpa
Compression Strength	>1.2Mpa
Volume-weight	0.9-1.5 g/cm3
Thermal Shock Resistance	6times/1100ºC
Application	High melting point metal alloys like Steel, Alloy Steel, Stainless Steel etc

Specification for Zirconia Foam Filter:

Dimension(mm)	Zirconia Foam Filter
	Pouring Rate(kg)	Filtration Capacity(kg)
50×50×22	3~5	30
50×75×22	4~6	40
75×75×22	7~12	60
75×100×22	8~15	80
100×100×22	14~20	100
Ф50×22	2~6	18
Ф80×22	6~10	50
Ф90×22	8~16	70

About us
    Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products. 

    Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.

    Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!