Fully Automatic Chain Link Fence Machine Cost

fully automatic chain link fence machine cost

I. Description
Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.


Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Sch***er inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min



II.Technical Parameter

Model	LW25-85
Width scope of weaving	≤3m/4m
Mesh scope of weaving	25mm-85mm
Wire scope	1.8-4.0mm
Outside size	Main machine	6700*1430*1800
	Net reel	5100*1700*1250
Motor	Servo Motor	5.5kw
	Cutter	1.5kw
	Rolling	0.75kw
Raw Material	Galvanized wire;PVC bag steel wire

III.Diameter of Wire Mesh opening size

Diameter of Wire	Mesh opening size
1.8mm	25-40mm
2.0mm	30-50mm
2.2mm	30-60mm
2.5mm	40-70mm
2.8mm	50-80mm
3.0mm	60-80mm
3.2mm	70-80mm
3.5mm	80-85mm
4.0mm	85*85mm

IV.Company:

V.Contact Information