Closed Cell EPDM Foam with One Side Adhesive for Automotive

Min.Order: 1
Product origin: Changzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 0.01 ~ 1

Description
EPDM Foam(Closed Cell): 110-150kgs/m3
EPDM Foam(Open Cell): 95-100kgs/m3
 
General Characteristics of EPDM Sponge Sheet: 
 
1. Closed cell structure making it impermeable to air and water and therefore an ideal material for sealing against air and/or water.
2. Outstanding aging properties and will not go brittle over time.
3. Very durable and relatively cheap.
4. Available in a wide range - high temperature, hard, soft, supersoft.
5. Good UV resistance.
6. Good mechanical properties.
7. Wide temperature range.
 
EPDM sponge sheet has superb air tight and water tight properties. Our EPDM foam sheeting is generally used within the automotive, electronic and construction trades. It is also a very good material for jointing expansion, weather strips, glazing seals and closure seals as well as being used for shock and noise absorbers and deadening. Its properties also make it suitable for requirements including thermal insulation on items such as garage door seals.




NospropertyUnitsTech requirmentsTest ResultTest Method
1tensile strengthMpa/0.44GB/T 6344-1996
2Elongation %/316GB/T 6344-1996
3Compression set%//GB/T 6669-2001
423 Cx72hX25%
 
/73.4/
570 CX24hX25%
 
/124.1/
6Hot air aging (70Cx70h) after
 
//GB/T3512-2001
7Tensile Strength rate%/22.7GB/T 6344-1996
8Elongation rate of change%/3.5GB/T 6344-1996
9Low temperature bend
(-40CX24H,180-degree bend sight)

 
/No cracksASTM-D1050-2008
10Heat shrinkage 
(90 degrees feeding x1H) after
%/0.8GB/T 3512-2000
11DensityG/CM3/0.13GB/T 6343-1995

Topsun, the Professional supplier for the Foams for the large used for Construction/Bluiding, Marine, Automotive, Insulation, Packing, Shoes and Footwear, Sport/GYM Production....
 
Any other details, pls connect with us freely, Warmly Welcome and Servcie for you in 24HRS...

topsunfoam.en.made-in-china.com
Scroll to Top