Complaint
110MM Russian Type CIR DTH Drill button bit
DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering. it has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. At the drilling hole of dia.105mm-dia.254mm, a plenty of the DTH drilling tools are used.
The selection of button bit is quite concerning with the rock condtion. If you don't know how to choose an applicable button bit, we strongely suggest you study the rock conditon first.
Below is the rock hardness grade list for your reference.
| Rock Grade | Hardness Level | Typical Rock | F grade | Applicable button bit |
| I | The hardest | the hardest and compact quartz, basalt and other extremely hard rocks | f=20 | The best quality |
| II | strong hard | very hard granite&quartz porphyry&siliceous schist, hard quartz, the hardest sandstone &limenstone rock | f=15 | The best or high end quality |
| III | very hard | compact granite, very hard sandstone&limestone, quartz vein, hard conglomerate, very hard iron ore | f=10 | High end or Normal |
| IIIa | very hard | hard sandstone, limestone, marble, dolomite, pyrite ore, not hard granite | f=8 | Normal |
| IV | hard | normal sandstone, iron ore | f=6 | Normal |
| IVa | hard | Sandy shale, shaly sandstone | f=5 | Normal |
| V | middel hard | hard pelitopsammite, not hard sandstone and limestone, soft conglomerate | f=4 | Normal |
Below is the typical rock photos for your reference. Just tell us your quarry/rock condition, we will recommend suitable button bit for you, it's easy.
| Drill bit diameter | Taper(°) | |
| (mm) | (in) | |
| 28 | 1 3/32 | 6,7 |
| 30 | 1 3/16 | 6,7 |
| 32 | 1 1/4 | 6,7,11,12 |
| 34 | 1 11/32 | 6,7,11,12 |
| 35 | 1 3/8 | 6,7,11,12 |
| 36 | 1 13/32 | 6,7,11,12 |
| 38 | 1 1/2 | 6,7,11,12 |
| 40 | 1 9/16 | 6,7,11,12 |
| 41 | 1 5/8 | 6,7,11,12 |
| 42 | 1 21/32 | 6,7,11,12 |
| 43 | 1 11/16 | 6,7,11,12 |
| 45 | 1 3/4 | 6,7,11,12 |
| 50 | 1 31/32 | 6,7,11,12 |
| 60 | 2 3/8 | 6,7,11,12 |
| Drill bit diameter | Thread standard | |
| (mm) | (in) | |
| 35 | 1 3/8 | R22 R25 |
| 36 | 1 13/32 | R22 R25 R28 |
| 38 | 1 1/2 | R22 R25 R28 R32 |
| 43 | 1 11/16 | R25 R28 R32 |
| 45 | 1 3/4 | R25 R28 R32 |
| 48 | 1 7/8 | R32 |
| 51 | 2 | R32 |
| 64 | 2 1/2 | R38 T38 |
| 76 | 3 | R38 T38 T45 |
| 89 | 3 1/2 | R38 T38 T45 T51 |
| 102 | 4 | T45 T51 ST58 SD60 |
| 115 | 4 1/2 | T51 ST58 SD60 |
| 127 | 5 | T51 ST58 SD60 |
| 140 | 5 1/2 | T51 ST58 SD60 |
| 152 | 6 | T51 ST58 SD60 |
we can guarantee all our product:
(1) Direct factory wholesale price, price is cheaper than trading companies.
(2) Strict Quality Control Department, each piece bit need to be checked.
(3) Accept custom order. can special make for you.
(4) Focus on the quality.We seek long-term interest.
(5)Welcome small orders, our Min Quantity Order is 1 piece.
(6) All bit are made by skilled workers and advanced technology, we have more than 20 years' experiences, so you must be satisfied with our super quality.
5pcs DTH drill bit packed in one wooden box
The Similar Russian type Cross DTH drill bit.
Our factory and workshop
FAQ Collection:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: Our factory is located in No.9 Kaixuan Ave West,Economic Zone Quzhou, Zhejiang, China
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equirement.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.
