Input | Rated voltage/frequency | Three-phase (U/S series) 380V 50/60Hz |
Voltage allowable range | Determined by model |
Output | Voltage | Determined by model |
Frequency | 5K Hz - 20K Hz |
Overload capability | 100% - long time |
Control method | Vector control |
Control characteristics | Power setting resolution | 0.1KW |
Current limit | 110% of rated current of the lamp |
Voltage limit | 110% of rated current of the lamp |
Power limit | Maximum output lamp rated power |
Undervoltage suppression during operation | Especially for users with low grid voltage and frequent grid voltage fluctuations, the system can maintain the longest possible running time according to a unique algorithm and disability allocation strategy even below the allowable voltage range. |
Typical function | Standby function | When the equipment is intermittent, set the standby power consumption for energy-saving occasions. |
Working time record | The lamp working time can be read during operation. |
RS 485 communication | Standard configuration RS485 communication interface, operation, stop command;Parameter setting modification;Machine status reading. |
Running function | External dry contact control machine starts and stops |
Failure analysis | With fault record query and fault cause analysis |
Display | Operation panel display | Operating status | Optional monitor output voltage, output current, set power module temperature, etc. |
Parameter setting | Flexible setting of relevant parameter values according to actual requirements |
Protection/alarm function | Overcurrent, overvoltage, undervoltage, overheat, short circuit, internal memory fault, etc. |
Environment | Ambient temperature | -10ºC to +50ºC (Not frozen) |
Ambient humidity | 90% or less(No frost) |
Surroundings | Indoor (No direct sunlight, no corrosion, flammable gas, no oil mist, etc.) |
Altitude | Less than 1000m |
Structure | Protection level | IP52 |
Cooling method | Independent air duct design strong cooling wind |