Crown Caps Making Line

Min.Order: 1

Product origin: Suzhou, Jiangsu, China

Infringement complaint:

Complaint

US$ 390000

Description

CY150 Blanking Press:

The machine is equipped with:
☆Automatic sheet feeder;
☆Sheet waxing rolls with wax metering unit;
☆ Double sheet detector with automatic bypass mechanism;
☆Misprinting electronic detection unit;
☆Sheets centering device;
☆15 dies on a two-rows die set. Blank diameters will be per Buyer's specification.
CY150 Blanking Press:
☆Fail-safe pneumatic clutch/brake unit allowing "inching", "single stroke", and "continuous" operating sequence;
☆Positive "step-by-step" sheets feeding mechanism;
☆Pneumatic/electric controls conveniently located at the press's rear
☆Press shock absorbers (no special foundations are required);
☆Compressed air lubrication and pressure controlling unit;
☆Drive motor;
☆Touch screen programmable logic control unit.
☆Electric interconnections and controls;
Max production: 150,000 crowns/hour
CY150

The main technology parameter
Total pressure force	190 KN	Blanked sheet per minute	8~9
Total stretch force	177 KN	Number of caps per hour	150,000
The power of press motor	5.5KW	Stroke of upper slide	74mm
Total installed power	9.05KW	Stroke of lower slide	36mm
Total absorbed power	5.5KW	Machine total weight with die	60KN
Number of strokes per minute	172	Weight of die	3.9 KN
Pressure of compressed air	0.7Mpa	Compressed air consumption	0.5Mpa
Max. metal sheet stack height	605mm

DMS250

Crown caps lining machine ModelDMS250
Automatic crown caps lining machine suitable for extruding PVC or PVC-FREE dryblend materials (PVC-FREE liner production will require a separate change-over kit), metering and cutting it into pellet, inserting the pellet into the cap and cold molding it to a fixed sealing gasket profile:
- Crowns feeding hopper with crowns alignmentdevice;
- "No crown/no compound" controlsystem;
- Compound extruder controlled by a A.C. motor and reduction gear withautomatic speed control;
- Compound by-pass valve;
- Extruder temperaturecontrol;
- Radio-frequency induction unit for crownheating;
- Compound insertingturret;
- Liner molding turret with temperature controldevice;
- Gasketsealingautomaticcontrolunitwithdefectivecrownsejectionunit;
- Out-going crowns counter, with automatic switching from a full carton to an emptycarton;
- Safetyguards;
- Electric controls and touch screen programmableunit;
- Motors, pumps, temperature and speed fully controllable and set from thescreen;