JAGUAR N300 wave soldering machine
Introduction:
1. Energy-saving, lead-free application, meet with environmental protection requirement and user friendly designed
2. Automatic power system, inverter control, automatic board in-load feature.
3. Flux sprayer using transverse Japanese spray nozzle and driving by stepper motor, spray range is selective, PLC controlled, accurate and reliable.
4. Flux recovery container drawer design, easy to clean.
5. Conveyor equiped 3 width adjustable screws, the conveyor transmission is more stable, no PCB falling risk.
6. Titanium solder fingers, high strengthened double v-groove with tin resistant
7. PID close loop controlled hot air pre-heaters, preheating system uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
8. Pre-heat passage modular design, environmental protection and safety, convenient for cleanup.
9. Solder motor adopts imported high frequency conversion motor with independent control, stable performance.
8. Solder pot's inpeller material is cast iron, never corrode, solder pot with oxidation jacket, low solder dross
11. Timer startup feature for solder pot, solder melted in within 90 minutes.
12. Automatic finger cleaner equipped.
13. With black box memory function, the machine can always store the SPC data, improve work efficiency.
14. Intelligent monitoring and alarm system ensure the stable performance and operators' safety.
Specification:
General specification | Dimension;3600*1400*1560mm |
| Weight:Approximately:1100kg |
| Start Up Power:Approx 24KW |
| Normal running power :6-8 KW |
| Power supply :3ph,AC380V/220V 50HZ |
| Control systems:PC With Window 7+PLC |
| PCB counter |
Conveyor systems | Direction: Left to Right ,Front Fix(R to L) |
| Titanium Alloy V shape Finger |
| 300mm PCB loading buffer at entrance |
| Conveyor speed control method: Motor(Panasonic) |
| Conveyor speed:300-2000mm |
| Conveyor angle:4-7° |
| PCB Component Height"Top 120mm bottom:15mm |
Spay Flux Systems | Stepper motor drive reciprocating Spray |
| 7-UP ST-8 Nozzles |
| The capacity of Flux is 6.5/liter |
| Flux auto Feeding (Option) |
| Spary air pressure:3-5bar |
| Modular structure for easy maintenance |
Heating system | Heating zones :Bottom 3 zones, |
| The Length of heating zones:1450mm |
| Heating method:Forces hot air / |
| Heating zones modularization easy to maintenance |
Solder pot | The capacity of solder pot :280KG |
| Two wave :Turbulence Wave and Lambda 2nd Wave |
| Materials :Titanium alloy (Op:Cast iron enamel) |
| Auto Solder Pot Moving (go in, go out ,up,down) |
| Cleaning Finger systems. |
Parts List:
| NO. | Spares Name | Brand | Origin |
| 1 | Display | Acer | China |
| 2 | Computer | Industrial computer | China |
| 3 | PLC | Siemens | Germany |
| 4 | Temperature control module | Siemens | Germany |
| 5 | 90W conveying Motor | Panasonic | Japan |
| 6 | Solder pot wave motor | ZIK | China |
| 7 | Preheating Coils | Taizhan | China |
| 8 | Solder pot heating tube | Taizhan | China |
| 9 | Main Switch | Mitsubishi | Japan |
| 10 | Contactor and currency limiter | OMRON | Japan |
| 11 | Intermediate relay | OMRON | Japan |
| 12 | Fuse holder and fuse tube | OMRON | Japan |
| 13 | Programming controller | CARLO GAVAZZI | Switzerland |
| 14 | Frequency Converter | Delta | Taiwan |
| 15 | Power button and indicator light | Izumi | Japan |
| 16 | Temperature detector | Nihon Dennetu | Japan |
| 17 | SSR | CARLO GAVAZZI | Switzerland |
| 18 | Photoelectric sensor | SICK | Japan |
| 19 | Cylinder | SMC | Japan |
| 20 | Flux sprayer | 7-UP | Taiwan |
| 21 | Patented titanium alloy claws | JAGUAR | China |
| 22 | Air/Main Switch | CHNT | China |
| 23 | AC Contactor | CHNT | China |
About Us:
Shenzhen Jaguar Automation Equipment Co., Ltd. is a professional Reflow Oven and Wave Soldering Manufacturer in Shenzhen, China. We focus on SMT and THT Soldering technology for more than 10 years, and our engineers have more than 20 years experience.
We are certified National High-tech Enterprise since 2017, integrated R&D, manufacture, service, trade, all our products have CE certification, our products are widely recognized at our domestic market as well as oversea market.
Our goal is to provide customers with the best service possible and to produce excellent quality products that will meet or exceed your expectations.
Our Factory:
More than 6000 square meters production plant.
More than 20 years experience in SMT automation equipment manufacturing. More than 50 peoples production team, among them
36 mechanical assembly technicians
12 electrical engineers
4 professional QC
Successful Experience:
JAGUAR's customer in 35 countries around the world
1. We have been helping customers to build a lot of new factories around the world.
2. Training more than 600 experts and technician for customers.
3. Became the most reliable Chinese partner for you.
Exhibitions:
Keep attending more than 10 exhibitions and forums each year.
The annual NEPCON and Electronica exhibitions are our regular event.
Participate in 3-5 overseas famous exhibitions regularly every year, like:
IPC Expo in San Diego, US
Electronica in Delhi, India
Electron Tech Expo in Mosco, Russia
WIN Exhibition in Istanbul, Turkey
Customer and Feedback:
Our Certificates:
We passed ISO certifications
We are IPC member company
We are National High-tech Enterprise
All the machines have CE and ROHS certifications
What we can do for you?
1. We provide full SMT and THT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT and THT factory setup
5. We can solve any question about SMT and THT
Contact:
Tina
Shenzhen Jaguar Automation Equipment Co., Ltd
Website:jaguarsmt.en.made-in-china.com
Add:14 Building, West of Furong industrial park, Shajing town, Baoan District, Shenzhen, Guangdong,China
Complaint
