Environmental Test Chmaber for Medical Instrument

Min.Order: 1
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 4000 ~ 8000

Description
Application
Salt Spray Test Chamber  or  Corrosion resistance test for products after treated by plating, anodized, spraying, and anti-rust. 
 

 
Standards implemented and met
1 GB/T 2423.17-1993 salt spray test  
2 GB/T 2423.18-2000 salt spray test
3 GB/T 10125-1997 salt spray test
4 ASTM.B117-97 salt spray test
5 JIS H8502  salt spray test
6 IEC68-2-11 salt spray test
7 IEC68-2-52 1996 salt spray test
8 GB.10587-89 salt spray test
9 CNS.4158 salt spray test
10 CNS.4159 CASS Copper accelerated acid salt spray test  
11 GB/T 12967.3-91 CASS Copper accelerated acid salt spray test
 
You can recommend us to your friends, your partners, and  even your rivals or your competitors.
Minolta, SIEMENS, EMERSON, EPSON, HUAWEI, etc are among our long-term clients:

Installation environment 
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switchgear and humidification condensate drains, and external power connector device is necessary  
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than800kg/m2
Leave adequate space for maintenance

Packaging
Each set protected with resin fiber and PP film, then put into strong wooden case with operation mannual and video inside.

After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

 
ModelKMH-1000L
1000L chamber volume
Temp. range -40°C ~150°C 
Display resolution0.1°C
Temperature stabilityHigh±0.5°C ,low ±1.0°C
Temperature uniformity ±2.0°C
Heat up time -40°C ~+100°C,within 45 min
Pull down time +20°C ~-40°C,within 60 min
Humidity range20~98%R.H,(standard),  '10~98%R.H,(with humidifier)
Humidity constancy±2.5%R.H
Humidity uniformity±3.0%R.H
Interior Dimension(mm)1000W*1000H*1000D 
Exterior Dimension(mm)1280W*2160H*1950D
Interior materialStainless Steel Plate(SUS 304)
Exterior materialBaked Painting Steel Or Stainless steel(SUS304)
Insulation materialRigid polyurethane Foam and Glass Fiber Wool
Total power  16KW(heater 6KW included)
Max current35.3A
Water Consumption2.5L/hr
Ambient Temp.+5°C ~+35°C 
Power Supply AC 380V±10%50Hz ,3 phase 4 wires +Ground Wires
Weight 600KG
Sight window size460*560mm
Sample holder 2 pcs
Fittingscable port(portΦ50mm)*1, chamber lamp*1, power cable *2m
Safety device  (standard)No fuse breaker,over pressure,over heat&over current protect,
over temp. protect, over load protect for blower, dry heat protect 
Control SystemBalanced Temperature & Humidity Control (BTHC)System
Refrigeration systemAir Cooled (Water Cooled is option)
Hermetic compressor 
Hermetic compressor                                                                                              
Single stage refrigeration system,                                                                          
CFC-Free refrigerant(HFC-507/HFC-23)
CFC-Free refrigerant(HFC-507/HFC-23)
Controller7-inch LCD Touch Screen panel                                                                       
Operation model :Program or fix point running
Memory capacity :120programs,1200steps,
All repeat 999 cycles, part repeat 99 cycles
Note: 1. We reserve the right to change specifications without prior notice                                                  
2. Customized sizes and configurations available


                                 
Product Tag:
Related categories:
Scroll to Top