Super Magpow RTV Gasket Maker in Grey

Min.Order: 10,000

Product origin: Changsha, Hunan, China

Infringement complaint:

Complaint

US$ 0.49 ~ 0.5

Description

[Feature]
The product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in the air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Have transparent, grey, white and black colors for selection.

[Main Component]
ω -Dihydroxyl Methyl Silicone

[Technical Feature]

No.	Item		Technical Parameter
			Top grade	Common grade
1	Appearance		Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing
2	Prolapse Distance	Vertical mm	≤ 3
		plane	No distortion
3	Density		0.93-0.98	0.93-0.98
4	Extrusion , ml/min		≥ 400	≥ 400
5	Surface setting Time, mm		5-15	5-15
6	Shao's Hardness		20-30	15-30
7	2 3 C Standard extend		≥ 0.4	≥ 0.4
8	Bonding destroy area under under standard condition %		≤ 5	≤ 10
9	Elastic recover rate%		≥ 80	≥ 80
10	Extend bond rate under standard condition		100% no damage	100%no damage
11	Setting time mm/24h		3-8	/
12	Oil-Leakage rate		≤ 2	/
13	applying temperature		-40~ 15 0 C	-40~ 120 C

[Scope Of Application]
This product are widely used for bonding of glass, rubber, wood, pottery, metal and surface of fiber, this product not suitable to use under water, and not suitable for bonding of dope, please finish brushing before construction.

[Using Method]
1. Clean the surface to get rid of the rust, oil, or any dirty.
2. Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
3. In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.
4. If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5. After completely solidify, amend the glue by knife.

[Warning]
1. It is not preferred for the applying at the air-tight situation. Keep ventilative during the operation as the acetic acid is released due to the chemical reaction.
2. Re clean the surface if operating could not be finished within 1 hour since first cleaning. Re clean the surface as well if rains or dirty is onto the surface again.
3. No toxic of product. But be careful not to make the glue get into the eyes or nose. Wash them at once if does.
4. Keep smooth and continuous during applying of the glue onto the sealing surface. The adhesive performance would be not good if the air get in.
5. Tighten the lid at once and take off the extrusion nozzle after gluing to avoid entering of the wet air and causing of the solidifying. Eliminate the remnants around the nozzle.
6. Remove the solidified glue on the bottleneck during re applying. The unsolidified glue inside could be used still. Store the rest glue of the bottle at air tight and shade.

[Storage And Packing]
1. The product is nonflammable. Keep dry and shade, air tight during storage.
2. The shelf life for grade acetic silicone sealant is 12 months and 9months for the medium grade, 6months for ordinary grade.
3. Packing specification: 85g in soft plastic tube; 280mL/PC, 300 mL/PC, in plastic barrel

HUNAN MAGPOW ADHESIVE GROUP CO., LTD
We are China Adhesive manufacturer. And The adhesive is a compound that adhesives or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.

Forward

Related products