HVAC High Pressure 1inch 12 Volt Electric Ball Valve for Hot/ Chiller Water

HVAC high pressure 1inch 12 volt electric ball valve for hot/ chiller water 

>> General

Low Price 3 Way Port Automated electric ball valve(HTW-EG) are used to control the on/off of heat/cool water air-conditioning system pipe to control the room temperature.  The valve is driven by synchronous motor.  The motor connects with room thermostats by the terminal of common, open and close.  By sampling and dealing with the site data, the thermostats send control signal to open/close the motor of ball valve.  Then the heat/cool water enters into fan coil unit to supply the heat or cool air.  When the room temperature reaches the set-point, thermostat will send a signal to cut off the ball valve and make it on the best status. Then the room temperature will keep in the comfortable range.
Valve thread size: G1/2,G3/4,G1,G1.1/4
Thread connection. Valve body could be installed first.  Simple wiring. The actuator could be installed near to the wall.


>> Technical Parameters
• Driving voltage:220VAC (12V, 24V, 110VAC optional)
• Power consumption:5VA (only during course of open and close) 
• Pressure-bearing of valve body:1.6MPa
• Allowance pressure:≤0.6MPa 
• Applicable medium:cool water, hot water and low pressure steam (≤0.4MPa) 
• Open and close time:two-way 30s, three-way 57s. 
• Temperature of applicable medium:1ºC-130ºC
• Applicable environment temperature:0ºC-65ºC
• Connection manner:ZG internal pipe thread (could be customized)

>> Wiring Diagram

>> Model Comparison Table

Model	Valve	Valve  Size	Flux Value(KV)	Zize	Closing Pressure (MPa)	Work  Medium	Media Temp.	Ambient  Temp.	Pressure (MPa)	Power Supply
HTW-EG-215	2-way	DN15	3.6(4.6)	G1/2	1.0	Chilling water/ hot water	2-90ºC	-5-60ºC	2.5	AC24V AC110V AC220V 50/60HZ
HTW-EG-315	3-way	DN15	3.6(4.6)	G1/2	1.0
HTW-EG-220	2-way	DN20	6.6(7.4)	G3/4	0.8
HTW-EG-320	3-way	DN20	6.6(7.4)	G3/4	0.8
HTW-EG-225	2-way	DN25	12.2(13.5)	G1	0.7
HTW-EG-325	3-way	DN25	12.2(13.5)	G1	0.7
HTW-EG-232	2-way	DN32	14.6(16.3)	G1.1/4	0.6
HTW-EG-332	3-way	DN32	14.6(16.3)	G1.1/4	0.6

 
>> More Hotowell Products

>> FAQ

Q1: Do you supply OEM or ODM?

A: Yes, we have strong R&D sources and production ability, and already helping many international companies OEM/ODM cases with highly positive feedback.

Q2: Which payments are acceptable?

A: We accept T/T,Paypal,Western Union.

Q3: How fast can I get the quotation?

A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us +86 0592 6538262 or tell us in your email so that we will regard your inquiry priority.

Q4: Can I visit your factory?

A: Yes, of course you are warmly welcomed to visit our factory. Please kindly contact us in advance.

Q5: What is your terms of delivery?

A: We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.

Q6: What's your production time?

A:Usually production time is 15 to 20 days for quantity below 1,000pcs.

Q7: Can I print my logo on the products, and customize my own designed packing?

A.:100% YES, but the order quantity shall be over MOQ, or else, extra costs will be charged.

Q8: How is your products' quality and warrenty?

A.:All of our products meet EU standards, samples are available for quality evaluation; all products are with 18 months warrenty.

Q9: What is your MOQ ?

A: 300PCS .

HVAC valve | Electric water valve |  Ball valve