Complaint
| Item | Technical requirements | Test method |
| Particle size, mm | bituminous coal:25~50,50~100,25~80 | GB/T189 |
| Block coal limit rate,% | ≤18.0 | MT/T1 |
| Inclusion rate, % | ≤3.0 | MT/T1 |
| Ash Ad, % | ≤18.00 | GB/T 212 |
| Coal ash melting softening temperature ST (°C) | >1250 | GB/T 219 |
| Total sulfur Std, % | ≤1.00 | GB/T 214 |
| Thermal stability TS-6,% | >60.0 | GB/T 1573 |
| Crush strength SS,% | >60.0 | GB/T15459 |
| Maximum thickness of the gel layer (1) Y, mm | ≤12.0 | GB/T 479 |
| Calorific value Qnet.ar, MJ/kg | bituminous coal:>21.00 | GB/T 213 |
| Item | Technical specification | |||||
| Engine | Model | 6300D/M | 6300D/M-1 | 8300D/M-1 | 8300D/M-2 | 8300D/M-3 |
| Type | Inline, water cooled, four stroke, spark plug ignition | |||||
| Non-turbocharged | ||||||
| Cylinder number | 6 | 8 | ||||
| Cylinder diameter (mm) | 300 | |||||
| Rated speed(r/min) | 500 | 600 | 500 | 600 | 600 | |
| Rated power (kW) | 400 | 440 | 500 | 550 | 660 | |
| Rated thermal consumption(MJ/kW·h) | ≤11.0 | |||||
| Rotate direction (From flywheel) | Clockwise | |||||
| Start mode | Compressed air/motor start | |||||
| Exhaust temperature (ºC) | ≤600 | |||||
| Oil consumption(g/kW·h) | ≤0.8 | |||||
| Generator set | Type | 350GFM | 400GFM | 450GFM | 500GFM | 600GFM |
| Rated power(kW) | 350 | 400 | 450 | 500 | 600 | |
| Frequency(HZ) | 50 | |||||
| Voltage(V) | 400/6300/10500 | |||||
| Current(A) | 631/40/24 | 722/46/28 | 812/52/31 | 902/57/34 | 1083/69/41 | |
| Power factor (COSΦ) | 0.8 (Lagging) | |||||
| Phase and connecting | 3phases 4wires /3phases 3wires | |||||
| Dimension (L×W×H) (mm) | 5800×1600×2900 | 6400×1600×2900 | ||||
| Weight(kg) | 18000 | 22000 | ||||
