Complaint
Incoloy800 Typical values (Weight %)
| Cr | Ni | C | Si | Mn | P | S | Fe |
| 19.0-23.0 | 30.0-35.0 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.030 | ≤0.015 | Margin |
Incoloy800 Mechanical Properties
| TemperatureºC | σ/ MPa | σ0.2 / MPa | δ5 /% |
| 100 | 425 | 140 | 160 |
| 300 | 390 | 95 | 115 |
| 500 | 360 | 80 | 110 |
| 600 | 300 | 75 | 95 |
Incoloy800 Physical Properties
| Melting Temperature Range | 1350-1400ºC | |||
| Specific Heat | 455J/(kg.ºC) | |||
| Thickness | 8.0g/lcm³ | |||
| Magnetism | / | |||
Incoloy 800H Close to the Brand
| GB/T | UNS | Trademark | W.Nr |
| NS112 | N08810 | Incoloy800H | 1.4876 |
Incoloy800H Typical Values (Weight %)
| Alloy | % | Ni | Ge | Fe | C | Mn | Si | Cu | S | Al | Ti | P |
| Incoloy800H | Min | 30 | 19 | Margin | 0.05 | 0.15 | 0.15 | |||||
| Max | 35 | 23 | 0.1 | 1.5 | 1 | 0.75 | 0.015 | 0.6 | 0.6 | 0.03 |
Incoloy800H Physical Properties
| Thickness | 8.0 g/cm3 | |
| Melting Point | 1350-1400 ºC | |
Incoloy 800HT Close to the Brand
| UNS | Trademark | W.Nr | |
| NO8811 | Incoloy 800HT | 1.4954 | |
Incoloy800HT Typical Values (Weight %)
| Alloy | % | Ni | Ge | Fe | C | Mn | Si | Cu | S | Al | Ti |
| Incoloy800HT | Min | 30 | 19 | 0.05 | 0.15 | 0.15 | |||||
| Max | 35 | 23 | Margin | 0.1 | 1.5 | 1 | 0.75 | 0.015 | 0.6 | 0.6 |
800HT Minimum value of mechanical properties of alloys at room temperature
| Alloy | Strength of Extension (Rm N/mm²) | Yield Strength (RPO.2N/mm²) | Ductility (A5%) | |||||||
| 800HT | 450 | 180 | 35 | |||||||
