Auto Half Tray Shrink Film Wrapper Wrap Packaging Packing Machines for Beer Water Juice

Min.Order: 1
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 30000 ~ 60000

Description
30pack/min tray shrink wrapping machine

 
Product description:

Technical parameter:
 Power supply. Total power : 380/220V ,60KW (three-phase)
voltage :380/220V,60KW (three-phase)
 external gas source : 4-6kgf/cm2
  main motor: 380V 3300W
Exit belt motor : 380V 750W
 Film feeding electricity motor: 3.3W
Machine size (L*W*H) :12500*1215*2150mm
Package piece speed : <=25package /minute
Package product size : can according to client special requirement.
Working platform height :L1150+50mm (can making according to special requirement).
Conveyor belt : shanghai
Usage film type : PE film and can use color film
PE film width PE: according to client requirement , film thickness: 0.07mm-0.13mm;
Film shrinkage ratio : length wise direction 70-80%, cross wise 20-30%.

  Whole machine all set safe protection device

Bottle hander film wrapping: via bottle handing pole control each group bottle movement distance, let it synchronization with film lifting pole, and let bottle push to film wrapping section belt; film lifting pole and film lifting device match torsion limit stopper, while bottle drop or bottle block, limit stopper movement let machine auto stop,  after failure solve, then turn limit stopper hand wheel reset.
Mechanism rotation: the machine rotation drove by servo motor, adopt to synchronous belt and chain rotation assembly method, ensure rotation harmony, the place that adopt to chain ration all add protection covet and lubricate device, ensure worker safe and circumstance clean.

   Have the function: while lack bottle, the machine will alarm, no bottle no film feeding function
 Controlling system: adopt to PLC and touch screen controlling, have manual. Auto move method, touch screen have full machine manipulation function, can display instant and accumulated package quantity, and enable can print with the connected printer.  Setting procedure is more quick and precise; controlling panel adopt to electronics touch and control button controlling, can directly input and revise package type parameter, also can save different package specification parameter; timely supervise facility operation whole process. All the working procedure all have sensor checker, have ego diagnose function, if have any breakdown, facility will auto stop, alarm light blink, display breakdown type indication on the touch screen; common type reducer motor matching frequency transducer, whole machine limitless speed adjust, move transmission is very steadily; can as above situation change, auto control machine movement speed.

 Mechanism character: mechanism spare parts adopt to stainless steel, chroming steel and strong anti-corrode character aluminum alloy ect material; surface good quality spray printing, whole machine have strong anti-rust character.

 The facility accord with safe manipulation and safe operation related criterion and standard. All the lubricate part connect central place, for convenient to handle, lubricate part all ensure have no pollute on the product.

 Performance character: high automatic degree, the machine choose PLC programmable control, electricity part all adopt to import reliable pneumatic device and super electricity controlling technology, have steadily character, easy to handle, low failure, high automatic degree ect advantage; easy to handle; the machine belong to full auto production, and can limitless speed adjust and whole line synchronization operation.

  Electricity collocation: Siemens PLC controller, Schne-ider contactor, FOTEK sensor switch, FESTOR pneumatic element, SIMENS servo motor, SEW electricity, SIMENS touch screen manipulation.; sensor switch, approach switch adopt product; low pressure pneumatic element adopt to France Schnei-der product, other element all adopt to famous brand.

Working flow: open power supply switch, cross film, choose manual film cutting, after one time film cutting success, then choose auto, machine start to operate. Product via bottle split flow facture, guiding fracture, bottle separate fracture, bottle handing film lifting up fracture, film wrapping fracture, at last via shrink tunnel, then finish whole film wrapping package working.

 Facility parts introduction:
Bottle entry plate chain guiding direction adjust

 
a). Loose left and right guiding direction inside screw, let left and right direction move to  

b). Left and right guiding direction inside width small than about bottle combination 10mm
 
Bottle sorting blocking board width adjustment

 
a). Use spanner rotate while range blocking board adjust screw pole, let distance adjust to corresponding location.
b). Bottle separation board distance: bottle max place diameter is :+2-3mm, let bottle separate tunnel aligning.
 
c). Record number the number show on displayer, convenient to next time adjust;
 
Cardboard system  



Load new pusher dog (2).  



Sorting film + Hot glue machine


Finished product photos



Fracture showing chart



Electricity list
.Electricity part
No
 
Name
 
Reducer type
 
 Number
 
Power and speed ratio
1Main electricity motorMU09/20 13.3KW 1:20
2Cutting knife electricity motor MU63/7.5 10.82KW 1:7.5
3Bottle entry board chain electricity motor Sa47dt90s411.1KW 1:23.20
4Bottle conveyor/feeding motor MNHL25/2F1FK7065-5Each 11.48KW 1:8.58
5Exit conveyor motor SA47DT80N410.75KW 1:20.33
6Slope card board feed motor SA47DT80K410.55KW 1:9.23
Spare parts
 
No Name
 
Type
 
Number
 
8Synchronization belt wheel (main) Z=36,groove TYPE 8m1
9Synchronization belt wheel (secondary) Z=35,groove TYPE 8m1
10Film lifting tensioning cylinder DSNU-32-160-PPV-A2
11Film sorting promote and demote cylinder DSNU-32-250-PPV-A1
 Photoelectric part
No
 
Name
 
TypeNumber
 
AContactor  LC-D0910-M7N1
BCorrelation switchRXM2LB1BD1
CMiddle relayS1 .S2 .S3 .S44
DBaffle board photoelectric OBS4000-18GM60-E54
EApproach 1NBB8-18GBM50-E25
FApproach switch 2NBM5-30GM50-E21
GTorsion limit 1
        

Main Electricity collocation list  
 
No Name SpecificationNumberBrandPlace of origin
1Touch screen 5.7 inch1setSIEMENS
 
German
   

 
2Servo electric motor  1set
3Servo controller    1set
4PCC controlling system 1pcs
5Manipulation plate 1pcs
6Bus connector interface 1pcs
7Input and output module 1piece
8Photocell 10 setsAUTONICS  Korea
9Pneumatics component 1pcsAIRTACTAIWAN
 
10Gear box
 
 1setTransmission
 Equipment Co.,Ltd
China
 
11Force conveyor
electricity motor

 
  1setTransmission
 Equipment Co.,Ltd
China
 
12Back Electricity shrink
tunnel motor
 3pcsTransmission
 Equipment Co.,Ltd
China
 
13Weather belt 2pcsHabsitSwiss
 
14Frequency converter 2setsTECOTaiwan
15Hot glue machine 1setRobatech
 
Switzerland
 
16Bearing  
SK or same level  product
Swiss
 
17Linear bearing   Swiss
 
19Pneumatic shaft/axis
 
 1pcsZhongguo Hangtian
 
China
 
20Conveyor chain
 
  Shanghai lilai
 
China
 
21Electricity component 
Low pressure
  Schnei-der
 
France
 

 

Workshop




Product Tag:
Related categories:
Scroll to Top