UL1581 VW-1 Vertical Wire Flame Tester for Cables
Introduction:
The cable horizontal and vertical burning test apparatus(VW-1)is designed according to the UL1581 sect 1080.1~1080.14, and meet the criteria of the VW-1(Vertical-specimen) Flame Test. It can be used to test 1060 products wire and cable FT1 and vertical burning test,1080 VW-1 test, 1061 test, 1090 horizontal test, and 1100 horizontal specimen or FT2 test; to assess the flame spreading the ability to combustible nearby of cable or flexible wire when it caught fire. The whole test is carried out in a sealed test chamber with a volume of 4.32 M3.
Standard:
• UL1581 sect 1060~1100
• ASTM D 5025
• ASTM D 5207
Feature:
1, The test chamber is electrolytic plate electrostatic spraying, elegant appearance, and the inside is roasted black.
2, The tester is equipped with a powerful exhaust fume extractor, when the test is complete, open and air supply system and exhaust to the outdoors, and during the test, the system is closed;
3, The air throttle is equipped behind the test chamber. After the completion of the test, open the ventilation system to air distribution in the cabinet, But during the testing, the air door should be closed.
4, The glass viewing window is on the front box, allowing easy observation during the test.
5, The test chamber is equipped with a sealed glove to operate the burner inside.
6, Test chamber size: available space 2.1M (l) *1M (w) *2.1M (h), capacity: 4.48m3. Dimensions 2.4m (l) *1M (w) *2.3M (h).
Temperature measurement system
1, A thermal sensor (copper tubing and thermocouples)-tube structure should be very high conductivity electrolytic copper. Length of 19.14 ± 0.02mm.
2, K-thermocouple, 0.5mm diameter of stainless steel tubes as a sleeve.
3, The digital temperature meter matches with the import K-type thermocouple, which readings greater than 1000 degrees centigrade.
4, Equipped with an electronic stopwatch: accurate to 0.1s.
Apparatus and Fixture
1, The main fixtures include a test stand and burner fixture
2, The burner inner diameter is 9.5 ± 0.5mm, the fire mouth diameter is 0.90 ± 0.03mm; burner pipe is 102mm. The air supply is adjustable;
3, The height of the flame is adjustable; Standard requests are: total height of flame is 125 ± 10MM, blue inner flame height is 40 ± 2mm; flame test angle is adjustable from 0 to 45°.
4, Imported gas special flowmeter and precise needle valve controlling gas flow.
5, Imported brands of pressure gauges and control valve working gas pressure;
6, The Test stand is made of stainless steel and includes a horizontal bracket, and vertical support an independent type, also as FT1, FT2, and VW-1, with three kinds of specifications. The plant of vertical support and blowtorch is parallel to the observation window plane, easy for viewing and operation.
7, The burner is imported from the USA, it fits ASTM D 5025-99 request
8, High voltage electronic ignition system, and automatic cut off of gas supply for security control system
9, Wedge-shaped frame: Add wedges, the burner is installed in the wedge, and can be easily moved and moved back to the defined position very accurately.
Specification:
The power supply | AC220V 50/60Hz, 1A |
Manual certificates | Supplied |
Air source | Methane gas (customer-owned) |
Size | 2150mm x 1200mm x 2150mm |