1. Built-in TD-LTE baseband chip, accurate frame synchronization algorithm to ensure accurate synchronous high-speed switching, and basically achieve transparent transmission.
micro power, built-in adaptive function to ensure good coverage and will not interfere with the macro station.
2. Automatically synchronize with the base station without manually setting the uplink and downlink time slot ratio.
3. Using this product can significantly improve the Internet access rate of TD-LTE terminals, which can effectively help operators improve the experience of TD-LTE users.
4. Without fiber transmission, the installation is fast and the overall cost is low. This product can quickly help TD-LTE operators optimize and extend the TD-LTE network in the initial stage of network construction, or perform precise indoor extension coverage in the middle and later stages of network construction.
5. Reduce the uplink transmit power of the terminal and significantly increase the battery life of the user terminal.
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
Application Diagram
Frequency Range | Uplink | Downlink | |||
GSM900 | 890-915MHz | 935-960MHz | |||
TD LTE2300 | 2300-2400MHz | 2300-2400MHz | |||
Gain | 60dB±2dB | 65dB±2dB | |||
Output Power | 15dBm±2dBm | 20dBm±2dBm | |||
Band width | Wide Band | ||||
ALC | ≥ 20dB | ||||
Ripple in Band | 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation Products | ≤ -40dBc | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |||
1~12.75GHz | ≤ -30dBm/30KHz | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50Ω | ||||
Power Supply | AC 90-264V, DC 5V/2A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40(Indoor) | ||||
Installation Type | Wall Installation | ||||
Size | 130mm*98mm*16mm | ||||
Weight | < 0.8Kg |