Complaint
| No. | Name | Description |
| 1 | Main display | Displaying the measured value (measuring mode) Displaying the parameter value (configuration mode) |
| 2 | Second display | Displaying the content (such as unit, alarm value) controlled by parameter diS2 (measuring mode) Displaying the parameter value (configuration mode) |
| 3 | Alarm output indicators | Indicating the states of alarm points |
| 4 | Set SET | In the measuring mode: Hold this button for over 2 seconds to enter the configuration mode. In the configuration mode: when a parameter symbol is displayed, hold this button for over 2 seconds to select next parameter category; when a parameter symbol is displayed, press this button to select next parameter; When modifying parameter value, press this button to save the changed parameter. |
| 5 | Left ◃ | In the configuration mode: when a parameter symbol is displayed, press this button to display the parameter value; when modifying parameter value, press this button to select the digit to be revised. |
| 6 | Up Δ | In the configuration mode: when displaying a parameter symbol, press this button to select the previous parameter (hold this button to select the first parameter of this category); when modifying parameter value, use this button to the increase the value. In the measuring mode: press this button to set the input display value to zero (Note ★); hold this button for over 1 second to display the input display value before zero setting. |
| 7 | Down ▽ | In the configuration mode: when displaying a parameter symbol, press this button to select the next parameter (hold this button to select the last parameter of this category); when modifying parameter value, use this button to the decrease the value. In the measuring mode: hold this button for over 1 second to reset the peak/valley value to the present input display value. |
| Specification | Rating/Condition | ||||
| Digital input | K | 1-point external digital input, used for zero setting | |||
| Alarm output | Size 160×80 | T1~T4 | Relay output of alarm point 1 to 4; all SPDT contact relays | 250V AC/3A Resistive load | |
| Size 96×96 | T1~T2 | Relay output of alarm point 1 & 2; both are SPDT contact relays | |||
| T3~T4 | Relay output of alarm point 3 & 4; both are SPST contact relays | ||||
| Size 96×48 | T1~T2 | Relay output of alarm point 1 & 2; both are SPDT contact relays | |||
| T3 | Relay output of alarm point 3, which is a SPST contact relay | ||||
| T4 | Relay output of alarm point 4; three SPST contact relays and one SPDT contact relay (Refer to the note for the restrictions on this model) | ||||
| Size 72×72 | T1~T2 | Relay output of alarm point 1 & 2; one SPDT contact relay and one SPST contact relay | |||
| T3 | Relay output of alarm point 3; one SPDT contact relay and two SPST contact relays (Refer to the note for the restrictions on this model) | ||||
| Size 48×48 | T1~T2 | Relay output of alarm point 1 & 2; one SPDT contact relay and one SPST contact relays (Refer to the note for the restrictions on this model) | |||
| O | OC gate alarm output (voltage smaller than 40V DC and current smaller than 40mA); for alarm relay output, it is omitted. | ||||
| Analog output | A1 | Current output (4~20)mA, (0~10)mA, (0~20)mA | Photoelectric isolation, Resolution: 1/3000; Load: 600Ω | ||
| A2 | Voltage output (0~5)V, (1~5)V | ||||
| A3 | Voltage output(0-10)V | ||||
| Power supply | B1 | 24V±5% , <50mA | |||
| B2 | 12V±5%, <50mA | ||||
| B3 | 10V±5%, <50mA | ||||
| Communication interface | S1 | RS232(only size A,size B) | Photoelectric isolation, Response time: <500μS (tested); Software selectable protocol (TC-ASCII or Modbus-RTU) | ||
| S2 | RS485 | ||||
My Dear Friends, welcome to visit our company!
Shenzhen Miran Technology Co., Ltd. is the largest Linear Position Sensor manufacturer in China.
Since 2003 we have been developed and produced Linear Position Sensor(brand: MIRAN, LinecSKI, WANSUNGM), Wire Rope Potentiometer, Magnetostrictive Liquid Level Sensor, Angle Sensor, Lubricating Pump(Oil/Grease/Butter), LVDT, Eddy Current Sensor, and many other Motion control products to support many different industries.
Our Products have been widely used in injection molding machines, die casting machines, rubber machines, footwear machines, EVA injection machines, bottle blowing machines, woodworker machines, hydraulic machinery, level control, suspension stroke control, construciton machinery, seaport machinery, industrial robots, etc.
We can offer you the competitive advantage products.
We also support to put your logo on the products if you need.
Please find the product you need and confirm the order.
If you cannot find what you need, please leave a message with your email or
Hope we can build up the long-term and harmonious business relationship!
Wish you have a happy shopping and visit us again!
