1.6MPa 13kg FM200 Hfc-227ea Hanging Fire Extinguishing System Automatic Brazilian Fire Extinguisher Fire Ball Extinguisher 3AAA

Min.Order: 10
Product origin: Guangzhou, Guangdong, China
Infringement complaint: complaintComplaint
US$ 160 ~ 220

Description
Electricity Gas HFC227ea Fire Suppression System

Description

•   Automatic suspension of HFC-227ea/FM200 fire extinguishing device, assemble the container, container valve, nozzle, etc installed to the ceiling or the wall independently. once fire occur, the fire extinguisher will start automatically or manually.
•   It's standard starting mode is temperature sensor and solenoid sensor.
•   It is maily used in smaller room, does not occupy the the ground area.
•   It works accurate and reliable, spray time is short, extinguishing fast.
•   Construction, installation is simple, low engineering investment.
•   Automatic HFC-227ea/FM200(Heptafluoropropane) fire extinguishing system is a set of fire extinguishing, automatic control and fire detection in one system which is the modern intelligent automatic fire extinguishing device.
•   HFC-227ea/FM200 (Heptafluoropropane) is a kind of colourless, tasteless, not conduct electricity and no secondary pollution gas.
•   The ozone-depleting potential value is zero.
•   Cleanness, low toxicity, good electrical insulation, higher fire extinguishing efficiency.
•   It is currently an ideal substitute for the halon extinguishing agent.
•   According to different location size, different capacity, different extinguishing agent, different starting mode to assemble.
Product Parameters

 


Parameters
 
NoSpecificationsParameters
1Tank size16Ltr, 20Ltr, 30Ltr
2Device modelXQQC16/1.6, XQQC20/1.6, XQQC30/1.6
3Storage pressure1.6mpa
4Maximum working pressure2.5mpa
5 Discharge time≤8s
6Maximum filling rate1kg/L
7Device starting powerDC24V/1.6A
8Environment temperature of protection zone0ºC~50ºC


Below data refers to regular temperature at 20 centigrade and atmospheric pressure at 1 bar. The max coverage would vary a little from the ambient temperature and pressure on the real condition.
Device modelFilling amount (kg)Maximum working pressure(Mpa)Storage pressure (Mpa)Maximum coverage
(m³)
Starting mode
XQQC16/1.6162.51.622.22Solenoid actuator

Starting power:
DC24V/1.6A
XQQC20/1.6202.51.627.78
XQQC30/1.6302.51.641.67
 



 

Components

One spherical pressure tank, fire extinguishing agent(HFC-227ea, same as FM200), hanging mounting, thermal sensor(one little glass tube filled with liquid whose volume will be changed by temperature), pressure switch, stainless steel pipe and nozzle.


 
Advantages

Though automatic FM200 fire extinguisher -- ceiling mounted style has two kinds of system, but their advantages are the same as followings:
1. Substantial consideration of little protection. Some areas, such as server rooms or electric rooms or the like would be very small, which require little fire extinguishing agent. Then, hanging type system can play its role.
2. Little occupation of space. As the protection zone is very small, so maybe there is no much space to place other machines or devices or objects. Then, the ceiling mounted style is designed with the small but efficient function of fire suppression and overall coverage to the whole room.
3. Convenient installation and transportation. Because of relative light and small figure, even one person can hold and fix it on the top of ceiling or wall. But additionally, the temperature-controlled model cannot be installed more than one piece in principle or practice.

 

Packages

We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.


Company Introduction
 

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.

Part Cases Show

•   In Sichuan province, the project cases are Bei Xin Run Yuan, Dong Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School, Wal - Mart near ASCB, New Hope Building, Xin Yi Zi Jin City, Tobacco Building, etc.

•   In Guangdong province, the project cases are GAC Group, 10086 in Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air Controller, Yingfu Building in Shenzhen, Bank of Communication in Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV Station, etc.

•   In Shandong province, the project cases are Lushang Office Building, Lushang Marketing Center, etc.

•   Part in Sichuan

•   Part in Guangdong

 
•   Part in Foreign Country

 

Why Choose Us

•   5 years quality guarantee
•   Xingjin is running in a high efficiency management system
•   Advanced equipments & professional engineers to promise all products are quite satisfactory.
•   We provide 8×6 hrs technical support and service.

After-Sale Service

•  We have an efficient sales and after sales team to promise slove all client's question in time.
•  We provide 8×6 hrs technical support and service.

FAQ

Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
 
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
 
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
      Of course yes. We always welcome and wait for your visit.
 
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.

 
Product Tag:
Related categories:
Scroll to Top