Water Treatment Plant Instant Industrial Water Chiller for Sale

Min.Order: 1

Product origin: Shanghai, China

Infringement complaint:

Complaint

US$ 1500

Description

Products Features
1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time.
2. Four stage volume control or 0%-100% automatic regulation.
3. Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace.
4. Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection.

Product options
1. Salt water evaporator
2. Stepless energy regulation
3. Whole heat recovery/partial heat recovery
4. Pump control
5. Special power supply
6. Remote communication connector

Product specfication
Refrigerant: R22/R407C/R410A/R134A
Evaporator max water pressure drop: 1.0Mpa
Evaporator: fouling factor 0.018m².ºC/KW
Power supply: 380V/3P/50Hz
Allowable voltage fluctuate: ±5%
Allowable frequency fluctuate: ±2%
The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses "W" type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle.
Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect.
There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.

Compressor
Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise.

Heat exchanger
The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%.
Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit.

PLC
A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Technical parameter

Air cooled screw(heat) chiller(single compressor) technical parameter

VA-
Type		85S	115S	150S	160S	200S	220S	255S	270S	300S	320S
Nominal cooling capacity	kw	85.0	115.0	150.0	160.0	200.0	220.0	255.0	270.0	300.0	320.0
Nominal cooling capacity	104 kcal/h	7.3	9.9	12.9	13.8	17.2	18.9	21.9	23.2	25.8	27.5
Nominal heating capacity	kw	92.0	135.0	170.0	185.0	230.0	250.0	290.0	300.0	330.0	360.0
Nominal heating capacity	104 kcal/h	8.2	11.6	14.6	15.9	19.8	21.5	24.9	25.8	28.4	31.0
Operating control method	Use PLC microcomputer control
Power Supply	380V/3N/50HZ
Startup type	Y-
Machine power	kw	30.8	40.9	50.3	59.6	70.6	76.7	85.0	88.5	99.8	108.4
Machine operating current	A	58.5	77.7	95.5	113.2	134.1	145.7	161.4	168.1	189.5	206.0
Compressor	Type	Semi-closed 5:6 asymmetric twin-screw compressor
	Cooling power(kw)	27.5	36.5	45.5	50.0	61.0	66.5	75.0	78.5	86.5	94.5
	Cooling current(A)	46.5	61.0	77.0	84.5	103.0	112.0	126.0	132.5	146.0	159.0
	Heating power(kw)	26.5	35.0	43.5	48.0	58.5	63.5	72.0	75.5	83.0	91.0
	Heating current(A)	44.5	58.5	74.0	81.0	98.5	107.0	120.0	127.0	140.0	152.0
	Energy regulation	0-33%-66%-100%			0-25%-50%-75%-100%
Evaporator	Type	High efficiency dry type shell and tube heat exchanger
	Flow(L/min)	14.6	19.8	25.8	27.5	34.4	37.8	43.8	46.4	51.5	55.0
	Water pressure drop(kPa)	45.0	45.0	45.0	48.0	48.0	48.0	50.0	50.0	50.0	50.0
	Interface size	DN65		DN80		DN100
Condenser	Type	High efficiency fin type heat exchanger
	Fan quantity	6	8	8	6	6	6	6	6	8	8
	Stand-alone power	0.6	0.6	0.6	1.6	1.6	1.7	1.7	1.7	1.7	1.7
Refrigerant	Type	R22
Refrigerant	Refrigerant volume(kg)	17.0	23.0	30.0	32.0	40.0	45.0	52.0	55.0	60.0	65.0
Overall dimensions	Length(mm)	2500	2950	2950	3200	3500	3500	3700	3700	4000	4000
	Width(mm)	1400	1400	1400	2200	2200	2200	2200	2200	2200	2200
	Height(mm)	1925	2100	2250	2150	2150	2200	2250	2350	2150	2250
Weight	Machine weight(kg)	1900	2000	2200	2600	2850	3000	3200	3500	3800	3950
Weight	Operating weight(kG)	2200	2300	2500	2900	3150	3300	3500	3800	4100	4250

Cooling condition: Chilled water inlet/outlet temperature 12/7 ºC, ambient dry bulb temperature 35ºC
Heating condition:Hot water outlet temperature 45ºC, ambient dry bulb temperature 7ºC, ambient wet bulb temperature 6ºC

Water cooled screw chiller(single compressor) technical parameter

VW-
Type		100S	135S	175S	190S	235S	260S	300S	320S	350S	380S
Nominal cooling capacity	kw	98.0	135.0	175.6	191.1	233.3	255.6	301.1	317.8	347.8	380.0
Nominal cooling capacity	10⁴ kcal/h	8.4	11.6	15.1	16.4	20.1	22.0	25.9	27.3	29.9	32.7
Operating control method	Use PLC microcomputer control
Power Supply	380V/3N/50HZ
Startup type	Y-△
Compressor	Type	Semi-closed 5:6 asymmetric twin-screw compressor
	Input power(kw)	23.0	30.0	39.0	42.0	51.0	56.0	63.0	66.0	73.0	80.0
	Rated current(A)	39.2	51.6	64.7	71.0	86.4	94.1	105.9	111.4	122.7	133.8
	Energy regulation	0-33%-66%-100%			0-25%-50%-75%-100%
Evaporator	Type	High efficiency dry type shell and tube heat exchanger
	Flow(m³/h)	16.9	23.2	30.2	32.9	40.1	44.0	51.8	54.7	59.8	65.4
	Water pressure drop(kPa)	45.0	45.0	48.0	48.0	50.0	50.0	50.0	55.0	55.0	55.0
	Interface size	DN65		DN80		DN100					DN125
Condenser	Type	High efficiency shell and tube heat exchanger
	Flow(m³/h)	20.8	28.4	36.9	40.1	48.9	50.0	50.0	55.0	55.0	55.0
	Water pressure drop(kPa)	42.0	42.0	45.0	45.0	48.0	48.0	48.0	52.0	52.0	52.0
	Interface size	DN65		DN80		DN100					DN125
Refrigerant	Type	R22
Refrigerant	Refrigerant volume(kg)	16.0	22.0	25.0	30.0	35.0	40.0	45.0	50.0	53.0	56.0
Overall dimensions	Length(mm)	2450	2450	2700	2850	2850	2850	2850	3250	3250	3250
	Width(mm)	660	660	660	890	890	920	920	920	960	985
	Height(mm)	1450	1590	1590	1600	1690	1690	1690	1690	1750	1750
Weight	Machine weight(kg)	850	1050	1150	1270	1340	1430	1640	1710	1780	1850
Weight	Operating weight(kG)	900	1150	1300	1420	1540	1670	1890	1930	1970	2050

Cooling condition: Chilled water inlet/outlet temperature 12/7 ºC, cooling water inlet/outlet temperature 30ºC/35ºC
Temparature term: Chilled water outlet temperature 5ºC~15ºC; cooling water inlet temperature 19ºC~33ºC.

Forward

Related products