Eddie EDT400 EDT430 breaker main body cylinder EDT450 EDT800 hammer back head EDT2000 front head hydraulic cylinder

 

The process and character:
1. The front heads, made from 20CrMo vacuum degassing steel, are forged in large proportion to fully ensure products' density and performance.
2. Using advanced CNC machine in strict accordance with products' technical requirement to forge products and ensure each position's size which convenient to equip.
3. The company adopts high quality 40 Chromium(back head) 20 Chromium (front head )material and advanced heat treatment technology which features surface wear-resistance ability and good core toughness and ensures that the product dose not crack under high intensity work.
Structure of front head:
Inner&outer bushing 1 set, rod pin 2 pieces, grease nipple 1 piece, through air valve 1 piece, outer bushing pin 2 pieces, inner bushing pin 1 piece, locking pin 2 pieces, Φ30 rubber plug 2 pieces, Φ20 rubber plug 3 pieces, Φ30 circlip 2 pieces 

We are manufacturer of hydraulic breakers/hammers and replacement spare parts for hydraulic breakers of Soosan, Hanwoo,NPK,Toyo,Furukawa, montabert, rammer, atlas copco, MSB etc., The hydraulic breaker parts we have are: front head, back head, cylinder, chisel tool, seal kits ,piston, diaphragm, thrust bush, ring bush, front cover ,rod pin/chisel pin, stop pin, accumulator, through bolt, side bolt , bracket, upper cushion, lower cushion ,damper etc.
   we can also make and install excavator hydraulic kits/hammer lines/piping kits/hydraulic installation kits/breaker lines for hydraulic hammer, hydraulic shear, hydraulic crusher, quick coupler, demolition grab, power rammer etc. We can also supply other excavator parts.
     We can produce more than 1000 types of chisels for hydraulic breakers for most world famous hydraulic breakers tool diameter vary from 40mm to 200mm. the following are part of the models that we can produce hydraulic hammer chisel tools for:


 

Krupp	HM45,HM50/55,HM60/75,HM85,HM130/135,HM170/185,HM200,HM300/301/305,HM400/401,HM550/560CS,HM580,HM600/601
	HM700/702/705,HM710/720CS,HM800,HM900/901/902,HM950/960CS,HM1200,HM1300/1500CS,HM1800/2000CS,HM2200/2500CS
RAMMER	S21,S20/22,S23/D30,S24,S25,S26,S29,S52,S54/D60,S55,S56/D70,S82,S83/D110,S84,S86,ROX100,ROX400,ROX700,
	E64,E66,E68,G80,G100,G120
N.P.K	H08X,H1XA,H2XA,H3XA,H4X,MB5X/6X,H7X,H8XA,H9X,H10X,H10XB/10XE,H11X/14X,H12X,H16X,H20X/20XE,H12X/E212,H18X/E218
INDECO	MES350,HB5,MES553,MES621,MES1200,HB12,HB19,MES1800,HB27,MES2500
MONTABERT	BRH30,BRH40,BRH45,BRH60,BRH76/91,BRP100,BRP130,BRP125,BRH250,
	RH501,BRH620, BRH625,BRH750,BRV32
STANLEY	MB125,MB250/350,MB550,MB800/875,MB1500/1550,MB1950/1875,MB3950,MB30EX,MB40EX
FURUKAWA	HB05R,HB1G,HB2G,HB3G,HB5G,HB8G,HB10G,HB15G,HB20G,HB30G,HB40G,HB50G,
	F-1,F-2,F-3,F-4,F-5,F-6,F-9,F-12,F-19,F-20,F-22,F-27,F-35,F-45,HB100,HB200,HB700
TOKU	TNB1E,TNB2E,TNB4E,TNB5E/6E,TNB7E/8E/10E,TNB13E,TNB14E/16E,TNB22E
OKADA	OUB301,OUB302,OUB303,OUB305,OUB308,OUB310,OUB312,OUB316,OUB318, UB8,UB11,UB14
SOOSAN	SB10,SB20,SB30,SB35,SB40,SB43,SB45,SB50,SB60,SB70,SB81,SB81NSB100,SB121,SB130,SB151
	SH200,SH400,SH700,SH18G,SH20G,SH30G,SH35G,SH40G,SH50G
KWANGLIM	SG200,SG300,KSG350,SG400,SG600,SG800,SG1200,SG1800,SG2100,SG2500,
DAEMO	DMB03,DMB04,DMB06,DMB4000,DMB5000,S150-V,S500-V,S900-V,S1300-V,S1800-V,S2200-1,S2200-2,S2500,S3000/3600/4500
HANWOO	RHB301,RHB302,RHB303,RHB304,RHB305,RHB306,RHB308,RHB309,RHB313, RHB322,RHB328/332
DAINONG	D30,D50,D60,D70/90,D110,D130,D160,T180,K20
	K25,K30,K50,K80,K120,K55S,K40S,
ATLASCOPCO	TEX75/80/100H/HS,TEX110H/HS,TEX180H/HS,TEX250H1,TEX400H/HS,TEX600/700/900H/HS,TEX1400H/HS,TEX1800/2000H/HS
GB	GB1T,GB2T,GB3T,GB4T,GB5T,GB6T,GB8T,GB8AT,GB11T,GB14T,GB170E,GB220E,GB290E/300E,GB400E
TOYO	THBB71,THBB101,THBB301,THBB401,THBB801,THBB1400,THBB2000

FAQ

Q: Are you a manufacturer?

A: Yes,our factory was established in 2010.

Q: Are you sure your product will fit my excavator?

A: Our equipments are suitable for most excavators. Show us your excavator model, we'll confirm the solution.

Q: Can you produce according to customers' design?

A: Sure, OEM/ODM service available. We are professional manufacturer in Yantai.

Q: What's the MOQ and payment terms?

A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.

Q: How about delivery time?

A: 5-25 work days after the payment.

Q: How about the package?

A: Our equipments wrapped by stretch film, packed by pallet or polywood case; or as requested.

Q: Which country have you exported?

A: Saudi Arabia, America, Thailand, Cyprus, India, Canada, Australia, Peru, Egypt, Brazil, Mexico, Iran, South Africa, etc.
 

Should you have any questions,call me,let's talk details.

Contact Person:Bruce Pei