Complaint
Order sheet
| Type code | - | Special mark | Material mark | Diameter | Pressure | / | Counter | Transmitter | Description |
| LC | - | Oval gear flowmeter | |||||||
| T | High temperature type | ||||||||
| U | Jacket type | ||||||||
| N | High viscosity type | ||||||||
| A | Iron casting type | ||||||||
| E | Cast steel type | ||||||||
| B | 304 Stainless steel type | ||||||||
| C | 316 Stainless steel type | ||||||||
| 10 ..... 40 ..... 200 | Nominal diameter: DN=10mm ... Nominal diameter: DN=40mm ... Nominal diameter: DN=200mm | ||||||||
| .1 | Nominal pressure (1.0Mpa) | ||||||||
| .2 | Nominal pressure (1.6Mpa) | ||||||||
| .3 | Nominal pressure (2.5MPa) | ||||||||
| .4 | Nominal pressure (4.0MPa) | ||||||||
| .6 | Nominal pressure (6.3MPa) | ||||||||
| A/A1 | DN50 (light type) with mechanical pointer display; A1 may be equipped with transmitter | ||||||||
| J1 | DN50 (heavy) with mechanical pointer display; It may be equipped with transmitter; | ||||||||
| A5/A6 | A5 Single pointer wheel display, A6 point reset may be equipped with transmitter | ||||||||
| Z | Double-handle reset | ||||||||
| 13 | Output signal only (pulse, 4-20mA) | ||||||||
| ELZ(BELZ) | LCD (-1 output pulse; -2 output 4-20mA;-3 output RS485) | ||||||||
| GF-I | 3-wire pulse (clockwise ) | ||||||||
| GF-II | 3-wire pulse (anticlockwise ) | ||||||||
| MF | 4-20mA analogue (-1 two-wire system; -2 three-wire system) | ||||||||
