Complaint
| Model | KWT6 Stack type | ||||
| Machine frame | Cast iron, 75mm thickness | ||||
| Machine drive | Timing belt drive, 5mm gear moudle (Japan bandong brand) | ||||
| Printing material | PE/PP/HDPE/LDPE/OPP/Plastic film....... Paper : 30-350g/m2, no over 800kg roll paper | ||||
| Printing color | 6color | ||||
| Max. Material Width | 600mm | 800mm | 1000mm | 1200mm | 1400mm |
| Max. Printing length (repeat ) | 300-900mm | ||||
| Max. Mechanical speed | 110m/min (Actual speed depend on print material, plate, ink etc.) | ||||
| Max. Printing speed | 10-90m/min(Actual speed depend on print material, plate, ink etc. | ||||
| Register precision | Longitude:±0.20mm ; Transverse:±0.20mm | ||||
| Suitable Ink | Water-based ink or Oil-based ink | ||||
| Plate material | Resin or rubber plate material | ||||
| Thickness of Plate | 2.28mm ( or at your choice) | ||||
| Thickness of Glue | 0.38mm, German Tesa | ||||
| Master motor | 3.7Kw, Taiwan Taibang brand | ||||
| The frequency converter | 3.7KW , Taiwan delta brand | ||||
| Machine power | 30kw | ||||
| Cover Dimensions (m) | 5.4× 2.3× 3.0m | ||||
| Machine weight | Around 4500KGS | ||||
| Voltage | 380V, 50HZ, 3PHASE ( or at ur choice) | ||||
| Plate roller on the machine | 4pcs × 40cm ( plate roller with chromplate avoid rusting) | ||||
| Single unwind: | |
| Max. Unwind diameter: | Ø1000mm |
| Unwind way | Single center unwind, Automatic tension control, 1pcs with 10kg magnetic powder and brake |
| EPC system: | Edge Position Control, 1pcs (China Chongqing brand) |
| Unwind material holder | Air shaft 3'',1pcs |
| Axis core diameter | Φ76mm (inner diameter) |
| Traction unit | |
| Constitution of Traction | Aluminum roller, chrome plated roller ( china wenzhou). |
| Traction Zone | 2 zones, unwind and rewind |
| Bearing | Japan NSK |
| One direction bearing | Germany ASNU |
| printing unit | |
| Transmission between plate roller and anilox roller | helical gear |
| Max. Printing length (repeat ) | 300-900mm |
| Press power | Mechanic control |
| Adjusting of Register | By manual |
| Printing roller lift up and down | Automatic hydraulic control print roller up and down |
| Anilox roll | Ceramic anilox roller |
| Inking Running way | Single side doctor blade |
| Ink transfer way | One-way diaphragm pump, Rubber roller |
| Inking motor | 60w |
| Dry unit | |
| Drying model | Electric heating, bowing first then heating. |
| Blower Independent Heating | 1.5kw / 2pcs, shanghai |
| Single rewind unit | |
| Max. Rewind diameter: | Ø1000mm |
| Unwind way | Single center rewind, Automatic tension control, 1pcs with 10kg magnetic powder and clutch |
| Rewind material holder | Air shaft 3'',1pcs |
| Axis core diameter | Φ76mm (inner diameter) |
