Description
Products and Company Introduction :XS CARBON supply DC Copper Coated Pointed Gouging Rods, DC Copper Coated Jointed Gouging Rods, DC Copper Coated Flat Gouging Rods.
Specifications
1) Dia: 5mm-8.5-16-19-25mm
2) Length: 300-305-355-400-455-510
3) Fixed Carbon: 98%
4) Ash< 0.9%
5) Copper Layer: 0.08-0.10mmArc-Air Gouging Copper Coated Carbon Electrode. The carbon electrode for carbon arc gas planning is an electrical Pole used in the carbon arc gas planning. The electrical arc can be produced between electrode and metal objects as electrical Pole and metal objects form electrical loop. The heat produced by electrical arc melt metal and compressed air blow away melt metal residues around the carbon electrode. The technology of using this method to cut metal or make slots on metal or remove redundant metal parts is called carbon arc gas planning.
The carbon electrode is mainly used in steel, iron, brass, hard alloy, stainless steel and other metal to slot, planning welding lines, remove redundant metal parts, cutting, making holes, filling the welding line defects and so on.
Products Specification : Model | Dia * Length | Standard Current Range (A) |
mm | Inches |
B503.2 | 3.2*305 | 1/8*12' | 130-180 |
B504 | 4*305(355) | 5/32*12'(14') | 150-200 |
B505 | 5*305(355) | 3/16*12'(14') | 200-250 |
B506 | 6*305(355) | 15/64*12'(14') | 300-350 |
B506.5 | 6.5*305(355) | 1/4*12'(14') | 320-370 |
B507 | 7*355 | 9/32*14' | 350-400 |
B508 | 8*305(355)(510) | 5/16*12'(14')(20') | 400-450 |
B509 | 9*305(355) | 23/64*12'(14') | 450-500 |
B510 | 10*305(355)(510) | 3/8*12'(14')(20') | 550-600 |
B511 | 11*305(355)(510) | 7/16*12'(14')(20') | 700-750 |
B512 | 12*305(355) | 15/32*12'(14') | 850-900 |
B513 | 13*305(355)(430)(510) | 1/2*12'(14')(17')(20') | 800-1000 |
B516 | 16*355(430)(510) | 5/8*14(17')(20') | 1000-1200 |
B519 | 19*355(430)(510) | 3/4*14(17')(20') | 1400-1500 |
CARBON ELECTRODE STARC PERFORMANCE STANDARD Electrical resistance ≤25μΩm
Breaking Strength ≥22 Mpa
Bulk Density ≥1.50g/cm3
Ash content ≤ 0.8%
Water Conten ≤ 0.2%
Fixed Carbon ≥ 98.5%
Introduction for Use :1. Carbon rods must be kept dry and can only be used when they are damp.
2. When used in DC power supply, the carbon rod is connected to the positive pole of the power supply and the negative pole is connected to the working.
3. The pressure of compressed air is kept at 0.5-1.6mpa
4. The arc distance between the carbon rod and the workpiece is about 3 mm, and the carbon rod exposed to the fixture is about 100 mm
5. The carbon rod and the workpiece form an included angle of 45 ° and planed along the tangent (or straight line) direction.
6. Carbon rods must be well ventilated when used. Operate according to the working current.
--------------------------------------------------------------------------------------------------------------------------------------------
Products Details Photos Show :XINGSHI CARBON AND GRAPHITE , WELCOME YOUR INQUIRY . THEN OFFER YOU BEST !