LNG Cylinders Cryogenic Gas Cylinder Circumferential Welding Machine*

Min.Order: 1
Product origin: Wuxi, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 45000 ~ 120000

Description
LNG Cylinders Cryogenic gas cylinder Circumferential Welding Machine*




Product Description
What is LNG?
Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4, with some mixture of ethane, C2H6) that has been cooled down to liquid form for ease and safety of non-pressurized storage or transport.
Improved Air Quality. Natural gas is the cleanest-burning fossil fuel, therefore vehicles running on LNG produce lower levels of toxic emissions and air pollution than equivalent diesel engines. Nitrogen Oxides (NOx) emissions are reduced by 40-50% and articulate Matter (PM) emissions are reduced by approx 80%.



LNG Cylinders Benefits

The differences between compressed natural gas (CNG) and liquefied natural gas (LNG) are the methods of production and storage.
Both fuels are primarily methane (CH4). LNG is natural gas 'frozen' to less than -162o Celcius (-212o Fahrenheit) to liquefy it. The advantage of liquefaction over compression is that the fuel is at a higher density, meaning more energy is contained in the same space - LNG is roughly 600 times the density of natural gas at standard pressure.
In general, LNG is more commonly used for heavier vehicles whereas CNG is used for lighter vehicles. This is not a hard and fast rule though and both fuels may be used in either class of vehicle.
Once the gas is liquefied, it must be kept cold or it will revert to its gaseous state, thus LNG cylinders are designed in a
similar fashion to a thermos flask, (i.e. with substantial insulation). This design allows for the fuel to be kept cold for two
weeks or more.

 

What we can supply?

We can provide a complete solution: from equipment manufacturing to final product production.



 
Normal Size LNG Cylinder
Diameter: Φ600mm ~ Φ1000mm; specifications 450L (Φ600 / 650mm), 1000L (Φ850mm), 1350L (Φ950mm), 1350L (Φ1000mm) Length (without head): 1110mm ~ 1550mm(Note: 400mm test board welding length is reserved, and the key board is driven and compressed by an independent cylinder);
Board thickness: 3.0mm ~ 5.0mm; Material: 304 stainless steel;
No.Device nameQtyNo.(worker)Remarks
1Inlet and outlet robot welding station11V-shaped double-station layout, in turn welding inlet and outlet pipes, gas phase pipe joints
Double station layout, welding 2 joints in turn
2Distribution head, joint robot welding station1 
3Inlet and outlet, gas phase tube, dispensing head artificial welding workbench11manual welding
4Supporting neck tube, flange inner and outer ring seam robot welding workstation11 
5Supporting neck tube, flange inner and outer ring seam robot welding workstation11 
6Support neck tube ring seam welding machine11Double gun configuration
7Front head, support neck tube, reinforcing plate manual assembly spot welding machine11Manually assembling the reinforcing plate and spot welding
8Front head, support neck tube ring seam welding machine11 
9Front head, reinforcing plate, ring seam welding machine1  
10Front head, support neck tube inner ring seam welding machine11 
11Front head, molecular sieve package manual assembly spot welding machine11Manual assembly spot welding
12Front head, molecular sieve, ring seam welding machine10 
13Molecular sieve package double-sided head manual welding station11 
14Internal pipeline manual welding station22 
15Molecular sieve package ring seam welding machine11 
16Front head logistics transmission line11Including: attachment welding equipment transmission line, double speed chain transmission line, aerial transplanter, power assist 
robot
 

LNG Cylinders Manufacturing Processes

Automatic pass-through straight seam welding machine
The equipment automatically completes the feeding, fixed seam, closed seam, compaction, placement / point fixed arc board, straight seam welding and discharge of the cylinder.

 
No.NameBrand
1.PLCSIEMENS
2.Frequency converterSIEMENS
3.HMISIEMENS
4.Pneumatic componentsSMC
5.Linear slide rail,ball screwHIWIN
6.AC motorSEW
7.AC servo motorSIEMENS, Schneider
8.Circuit breaker,Contactor,electronic overload protectionSchneider
9.ButtonSchneider
10.SensorOMRON
11.EncoderOMRON, Koyo
Full-automatic dome assembly&spot welding machine
The dome is automatically pressed and assembled, and the position of the welding seam is automatically scanned and automatically compensated, and the workpiece is rotated and position.
Automatic Circumferential welding machine-LNG Cylinder
Circumferential seam welding machine can adopt special machine welding or robot welding form, and the workpiece can be automatically loaded by manual assistance or aerial manipulator. It can be configured with contact or non-contact welding seam automatic tracking system to automatically locate and track the welding seam position.

Front Dome attachment automatic welding production line

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

 

Process flow chart of automatic welding production line for front Dome attachment

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Welding robot workstation for inlet and outlet liquid pipes and pipe joints
The robot of the inlet and outlet liquid pipe and the double-sided joint is welded automatically. Welding process: TIG. Welding method: V-shaped double station layout; each station is equipped with 3 station fixtures, corresponding to 3 different inlet and outlet pipe workpieces, using manual picking and placing, positioning the workpiece, and robot automatic welding. Robot system: The robot system is equipped with products of Japan's MOTOMAN company, including the body of the arc welding robot embedded in the MA1400 cable and the robot control box.
Distribution head, pipe joint welding robot workstation
The robot for automatic welding of the distribution head and the threaded pipe joint. Welding process: TIG. Welding method: double station layout; place the distributing head and the thread joint manually, use the two holes at the lower end of the distributing head to position in the tooling fixture; use manual pick and place, position the workpiece, and the robot automatically welds. Robot system: The robot system is equipped with products of Japan's MOTOMAN company, including the body of the arc welding robot embedded in the MA1400 cable and the robot control box.
Customized machine for circle welding of supporting neck tube and distribution head
The support neck tube is automatically welded to the distribution head. Welding process: TIG. Welding method: two welding guns are automatically welded at the same time. The support neck tube and the distribution head that are completed by spot welding are manually clamped and positioned by the front pneumatic chuck of the rotary head, and the neck tube is positioned tightly by jacking the cylinder.
Front Dome head, support neck tube, reinforced plate manual assembly spot welding machine
Welding process: TIG; Welding method: manual welding; Positioning method: online layout, the front head is positioned and transmitted by the accompanying tooling plate, the inner header and the gas valve are manually placed and positioned, and the manual pressing clamp drives the positioning and pressing mechanism to press the workpiece

Packing&Delivery

FAQ
Q: Can you design machines according LNG cylinder or other tanks/cylinders technical drawing?
A: Sure, please send your technical drawing to us.
Q: What are the benefits to choose your machines?
A: Our machines are strong and reliable for long term industrial manufacturing
Product Tag:
Related categories:
Scroll to Top