Complaint
| Material | The main component of PVC edge banding is polyvinyl chloride. Polyvinyl chloride resin (PVC) is used as the main raw material. Then add appropriate amount of calcium carbonate, anti-aging agent, modifier, etc. |
| Thickness | 0.4mm - 5mm, Customized sizes can be organized |
| Width | 9mm - 80mm, Customized sizes can be organized |
| Length (Per Roll) | 100m, 200m |
| Surface Color | Wood Grain, Solid Color, Shine, Glossy, Embossed etc. (Any design/color is available.) |
| Finish | High Glossy, Bright, Matt, Super Matt, Textured |
| Application | Furniture Parts, Furniture Accessories, kitchen cabinet, table, teaching equipment, laboratory, interior design and other construction decorations |
| Temperature | High temperature and low temperature resistant |
| Features | Non-color variation after trimming and polishing |
| Strong bonding strength | |
| Superior durability and wearability | |
| Excellent light stability | |
| Stain and chemical resistance | |
| Heavy metal free | |
| Phthalates free | |
| No pressure whitening | |
| Packaging | Protected with plastic foam and packaged in carton |
| Supply ability | 9000,000m per month |
| MOQ | 5000 Meters |
| Shipping Date | 15 days after receiving the advance payment or L/C |
| Payment Terms | TT or L/C at sight |
| PVC edge banding is divided into several proportions according to the ratio of added PVC and calcium carbonate. When the proportion of calcium carbonate is high, the physical properties are unstable, the PCV edge banding will be easily broken and fade color. High-quality PVC edge banding, due to the high proportion of PVC components, product stability is very high, then it will not be easily broken and fade color. The quality of PVC edge banding is generally reflected in the following aspects: 1. The surface is smooth, no bubbles, no lines, and the gloss is moderate; 2. The surface and back are flat, uniform in thickness and uniform in width; 3. The hardness is reasonable, the higher the elasticity, the better the quality and the stronger the wear resistance; 4. The back treatment agent is transparent or white, and The coating should be uniform. If it is not handled properly, it will result in low adhesion and even unable to be bonded after the edge banding; 5. The color of each batch of edge banding should be as consistent as possible. The smaller the color difference of different batches, the better the quality; 6. No debris and gaps while trimming and cutting. |
| 1. Mostly, the higher the temperature, the better the bond strength. It is recommended to use medium and high temperature hot melt adhesive as much as possible for best results. 2. Manual edge banding machine or semi-automatic edge banding machine are not recommended , because there is no polishing function, it is recommended to manually polish to ensure the trimming effect. 3. During the process of use, if the glue line is too thick or there is overflowing and drawing, it is necessary to adjust the speed of the edge banding machine and the temperature of the hot melt adhesive. 4. If the surface of the edge banding tape is easily scratched by the equipment during the edge sealing process, the surface of the edge banding tape is not properly treated and is unqualified. 5. In the process of using the edge banding, if the sealing does not occur, please check whether the indoor temperature and hot melt temperature are correct (no less than 18°C) or the speed of edge banding machine is too slow. |
