Es-P41 2 in 1 Dual Mounted Infrared Motion Sensor

Min.Order: 1

Product origin: Ningbo, Zhejiang, China

Infringement complaint:

Complaint

US$ 1 ~ 4

Description

ES-P41 2 IN 1 Dual mounted Infrared Motion Sensor

The product is a new saving-energy switch; it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and
identify automatically day and night; its installation is very convenient
and its using is very wide. It has functions of power indication and
the detection indication

SPECIFICATIONS

Power Source	220-240V/AC,50HZ
Detection Range	360°
Detection Distance	8M,Diameter
Time delay	10sec-7min,adjustable
Rated Load	800W(incandecent lamp) 400W(LED or energysaving lamp)
Ambient light	<10-2000LUX,adjustable
Working Temperature	-20ºC-+40ºC
Working Humidity	<93%RH
Installation Height	2.2-4M
IP Rating	IP20

FUNCTION

Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the "sun" position (max). It can work in the ambient light less than 10LUX when it is adjusted on the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
Time-Delay is adjustable. It can be set according to the consumer's desire. The minimum time is 10sec±3sec. The maximum is 7min±2min

INSTALLATION: (see the figure)

Switch off the power.
Turn clockwise the bottom-stand and take off it. The power wire cross the hole in the middle of bottom-stand.
The bottom-stand is fixed on the selected position with inflated screw.
Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.

CONNECTION WIRE DIAGRAM

Test

Turn the TIME knob to minimum (-) position with anti-clockwise.
Turn the LUX knob to SUN position with anti-clockwise.
Switch on the power, the controlled load and indication lamp both are not working. Preheat 30 sec later, the load and indication lamp should be turned on synchronization. In the absence of no inductor signals, the load should be stopped working within 5-30sec, the indicator lamp is turned off.
After the first sense is finished, and it will sense again after 5~10sec. The load should work. When there is no inductor signals in the indicator lamp, the load should be stopped working within 5-15sec.
Turn LUX knob clockwise on the minimum (MOON position). If it is adjusted in the less than 10LUX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.

Note:
when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!

Pictures

Other model of Infrared Motion Sensor

Forward

Related products