China Motor Actuator with Gearbox 2nm DC3.6V for Mini Motorized Ball Valve

China Motor Actuator With Gearbox 2NM DC3.6V For Mini Motorized Ball Valve

General Description:
The Motor Actuator with gearbox, is powered by 0-5V battery. It can drive a shaft in a mini motorized ball valve for control the flow in pipe line. With proper gear reduction ratio and motor, its torque output is from 1.8NM minimally. The larger toqure can be achieved for driving bigger valve: DN15, DN20, DN25, DN32, DN40, DN50. Larger size ball valve can be supplied too. The gearbox of motor actuator is with metal gear, very sturdy design ensures the long service cycles more than 20000 times. Over years, we supplied to many brand water meter factories in China.

Applications: mini motorized ball valve, prepaid water meter, AMR water meter, ultrasonic water meter, heat meter, HVAC, zone valve, heat control valve, etc.

Technical data-Model K04
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idling: <25 mA @ 3.6V, 23ºC
3. Current with loading: <450 mA (motor #300)
4. Torque: >4.5 NM
5. Open/close time: <25S
6. Velocity reduction ratio: 6200:1 (DN15-32)
7. Protection: 0

Wiring diagram
     

Wire color	Description
Blue	signal of switch on position, open valve
White	signal of public terminal
Yellow	signal of switch off position, close valve
Red	power terminal, + positive
Black	power terminal, - negative

Factory overview
-Production facilities
Warehouse